Author Topic: WileyCoyote's WIPs - Continues to Lurk Around (Read 706032 times)

Starforce2 · « **Reply #380 on:** January 12, 2009, 12:17:29 AM »

Wiley, I've finished the hp for the courageous, send me a tac icon so I can finish her up. Also, if you want it released for sfc, send me a 3ds.

086gf · « **Reply #381 on:** January 13, 2009, 02:39:19 PM »

Awesome ships as always.

JimmyB76 · « **Reply #382 on:** January 13, 2009, 04:08:13 PM »

Quote from: Starforce2 on January 12, 2009, 12:17:29 AM

Wiley, I've finished the hp for the courageous

the courageous? which one was that?

WileyCoyote · « **Reply #383 on:** January 13, 2009, 04:57:37 PM »

I recently made a few kitbashes of p81 ships, similar to what Starforce has done in the past. I also made an assimilated Excelsior ship.

Billz · « **Reply #384 on:** January 13, 2009, 05:07:00 PM »

Ooh. You have to release that.

Thats caught my attention. Reminds me of the Cour De Lion, which is also one of my favourites aswell as the Ulysses. Looking forward to this and the Kelvin-prise the most Wiley. Nice job. Are the textures gonna be high res aswell?

WileyCoyote · « **Reply #385 on:** January 13, 2009, 05:34:32 PM »

The Courageous kitbash has 1024 pixel textures, the Kelvin lineage ships all have 2048 pixel textures.

tiqhud · « **Reply #386 on:** January 13, 2009, 05:34:51 PM »

You been busy Wiley. +cookie your looking a-bit thin [EAT]

FourChan · « **Reply #387 on:** January 14, 2009, 12:42:26 AM »

Hey Wiley, I've given you a box of Oreos by now

Can you do me a favor on the Excelsior Class ship? Do a progressive assimilation pack, like from the mild assimilation you have there to like, half the ship being turned into a Cubeish design. Like how they did the Scout Ship in ST: Enterprise. I seen a lot of assimilated ships but none that follow that trend of assimilating it. This is just a suggestion, if you don't mind a little input.

WileyCoyote · « **Reply #388 on:** January 14, 2009, 11:30:33 AM »

I found more schematics for the JJ-prise from a thread at trekbbs, so I'm rebuilding the whole ship. The secondary hull is a pain in the *** to build. Anyone have any ideas of how to build it? I could do something similar to MadKoiFish's iConnie at scifi-meshes, with the U-shape cut out of the engineering hull.

EDIT: Images removed because the ship has been released and to save up on space.

szekeres2008 · « **Reply #389 on:** January 14, 2009, 11:56:36 AM »

I think the secondary hll hull has a really stupid shape, I hate it.

WileyCoyote · « **Reply #390 on:** January 14, 2009, 12:01:17 PM »

Quote

I think the secondary hll hull has a really stupid shape, I hate it.

Well then, how can I improve it without looking too dated like the 60's version?

szekeres2008 · « **Reply #391 on:** January 14, 2009, 12:32:00 PM »

Good question, however I think the original is allways the best.

baz1701 · « **Reply #392 on:** January 14, 2009, 12:32:11 PM »

Quote from: WileyCoyote on January 14, 2009, 11:30:33 AM

The secondary hull is a pain in the *** to build.

I know what you mean I rebulit my Engineering hull 5 times before I was happy with it. I finally built it using polys from the aft section forward. But you've seen my mesh this may not be the best way.

Shadowknight1 · « **Reply #393 on:** January 14, 2009, 12:36:42 PM »

I love the shape of the secondary hull. Unfortunately, not being a modeller, I can't give a lot of advice, but I'd suggest building the outer part first and then the inner part with the deflector dish.

MarkyD · « **Reply #394 on:** January 14, 2009, 01:46:02 PM »

with the way the curve of the rear is so flowing and less dramatic, and not cut out like it normally is i would shape it using an FFD Modifier cage

WileyCoyote · « **Reply #395 on:** January 14, 2009, 03:40:30 PM »

It looks like the FFD Modifiers are going to be my friend

. Here is the JJ-prise version 2- a work in progress.

EDIT: Images removed because the ship has been released and to save up on space.

Vortex · « **Reply #396 on:** January 14, 2009, 04:01:50 PM »

Looks awesome!1 Have a cookie.

Aeries · « **Reply #397 on:** January 14, 2009, 07:14:49 PM »

Excellent work so far, buddy!

Shadowknight1 · « **Reply #398 on:** January 14, 2009, 07:17:42 PM »

Indeed good sir.

Starforce2 · « **Reply #399 on:** January 14, 2009, 11:18:06 PM »

you mirandacelcioberth hardpoint and icon display is done and ready for you to test. If you want me to release one for SFC I need a 3ds.

News:

Author Topic: WileyCoyote's WIPs - Continues to Lurk Around (Read 706032 times)