Author Topic: Trek XI Enterprise (Read 25284 times)

baz1701 · « **on:** November 12, 2008, 04:17:13 PM »

Well it was bound to happen soon or later. but here is mine

moed · « **Reply #1 on:** November 12, 2008, 05:57:54 PM »

Very good start.

The nacelles seem a bit too long though.

WileyCoyote · « **Reply #2 on:** November 12, 2008, 06:18:16 PM »

Good interpretation. Once there is enough reference, I'll give it a try.

baz1701 · « **Reply #3 on:** November 13, 2008, 04:59:19 AM »

I'm sure yours will blow mine away.

WileyCoyote · « **Reply #4 on:** November 13, 2008, 08:24:18 AM »

Try the Kelvin. It looks much more easier to model.

Johnnymuffintop · « **Reply #5 on:** November 13, 2008, 12:29:48 PM »

The probably with the Kelvin, we've seen even less of that ship than we have of the Enterprise.

By the way, this might help for setting proportions:
http://www.scifi-meshes.com/forums/attachments/2d-wips/60238d1226467315-uss-jj-enterprise-eneterprise-xi.jpg

086gf · « **Reply #6 on:** November 13, 2008, 01:50:47 PM »

JMT, dl the image to your harddrive then upload it.;) Never linking to an attatchment = common sense.

baz1701 · « **Reply #7 on:** November 13, 2008, 03:04:42 PM »

completely rebuilt the secondary hull and modifed the nacelles

Vortex · « **Reply #8 on:** November 13, 2008, 03:11:02 PM »

Much better. (Model wise.)
The nacelles need to be moved up to clear the saucer, as we know they now are. It would look great then.

Of course, if you want to try and get it accurate to the screenshot, I think that the secondary hull on your model need moving forward a bit. From the screenshot that was released, it looks as if the deflector is about level with the sensor array at the bottom of the saucer.

(Move the nacelles up though and I prefer your version.)

WileyCoyote · « **Reply #9 on:** November 13, 2008, 04:24:15 PM »

I tend to think of the nacelles as large jet-engines, that birds can get sucked up in. The front section of the nacelle goes in, probably like a bowl, and the bussard collector fits inside it. The torpedo bay should be much smaller too. Also, try to keep the top saucer similar to what was shown in the teaser trailer.

baz1701 · « **Reply #10 on:** November 13, 2008, 04:28:18 PM »

I'm happy to turn this over to one of the better modders to finish off

WileyCoyote · « **Reply #11 on:** November 13, 2008, 04:41:09 PM »

Once I get some progress on my version, I'll add it to my WIP thread......hmm....I'm now doing two reimagined Enterprises.

baz1701 · « **Reply #12 on:** November 13, 2008, 04:42:40 PM »

I'll uploaded it as is to my file front account.

Love to see with people do with it

ACES_HIGH · « **Reply #13 on:** November 14, 2008, 01:28:00 PM »

the undercut on the secondary hull needs to be more prominent, checkout this article on EAS: http://www.ex-astris-scientia.org/articles/new_enterprise_comment.htm

baz1701 · « **Reply #14 on:** November 14, 2008, 02:28:10 PM »

used the profile to alter the shape

Vortex · « **Reply #15 on:** November 14, 2008, 04:39:41 PM »

That looks more like it!

Good model.

Fugly design.

intrepid90 · « **Reply #16 on:** November 14, 2008, 05:59:46 PM »

it looks gorgeous.
and I like the new design.

captain_obvious · « **Reply #17 on:** November 14, 2008, 06:26:10 PM »

ugh! the way the bottom of the engineering hull goes is minging!!

the bussards seem too small for the thing too...

Nebula · « **Reply #18 on:** November 14, 2008, 10:12:11 PM »

hmm did you make a youtube vid?

moed · « **Reply #19 on:** November 14, 2008, 11:04:19 PM »

Also excellent work.

You and Wiley are contesting with very good interpretations.

News:

Author Topic: Trek XI Enterprise (Read 25284 times)

intrepid90