Author Topic: Baz1701 WIP's - Semi retired. (Read 450012 times)

baz1701 · « **Reply #2480 on:** January 10, 2011, 08:59:10 AM »

Not sure how I'll get the doors to open yet.

Here are some views of the Garden and a couple of beauty shots of the ship thus far.

Lurok91 · « **Reply #2481 on:** January 10, 2011, 01:03:30 PM »

Quote from: Bren on January 10, 2011, 08:45:40 AM

You gonna use Ftech or MVAM to model swap for shuttle launching?

Quote from: baz1701 on January 10, 2011, 08:59:10 AM

Not sure how I'll get the doors to open yet.

For shuttle launching on this beauty, I'd go with MVAM. Hopefully that way you'll get nice cutscene as well

Bren · « **Reply #2482 on:** January 10, 2011, 04:33:53 PM »

The nice thing about Ftech is the intermediate animations, though I hear they're a pain to do. It could be scripted that the doors are open at green alert, and at yellow or red alert, they swivel closed, like how the wings on - I think - the KM BOP swivel down at red alert.

Nice work on the garden

Lurok91 · « **Reply #2483 on:** January 10, 2011, 04:45:00 PM »

Quote from: Bren on January 10, 2011, 04:33:53 PM

The nice thing about Ftech is the intermediate animations, though I hear they're a pain to do.

Ftech anims not a prob. But you need to be visually on them (external view) to appreciate them. The reason I suggested MVAM is that whether you triggered from bridge or external view, you'll get a nice anim either way which i think suits shuttle launch better

baz1701 · « **Reply #2484 on:** January 10, 2011, 06:09:59 PM »

Most likely MVAM as I used them on my first connie.

Started to detail the secondary hull (no glows yet)

Shadowknight1 · « **Reply #2485 on:** January 10, 2011, 07:53:22 PM »

Looking good!

baz1701 · « **Reply #2486 on:** January 11, 2011, 08:25:38 AM »

let there be light

CptBenSisko · « **Reply #2487 on:** January 11, 2011, 11:27:56 AM »

Looking good Baz...id suggest though getting rid of the triangular glows on the lower primary hull...only the registry should have the triangular glow..and then its not really triangular more like an enlongated oval..there are small lights on the port and starboard they shouldn't go much past the four running lights..and then the aft light where 'ENTERPRISE' will be should be circular in shape...that will make this version almost picture or in this case movie perfect.... keep it up buddy!!

baz1701 · « **Reply #2488 on:** January 11, 2011, 11:35:38 AM »

I see what you mean on the enterprise one at the back but the others can not see what you mean by the others.

The light glows were created using lights on the model then copying them to the alpha channel of the texture.

Shadowknight1 · « **Reply #2489 on:** January 11, 2011, 12:47:16 PM »

Those big side lights on that shot baz are not present at any other time.

Darran · « **Reply #2490 on:** January 11, 2011, 01:20:04 PM »

Oh they don't do they?

baz1701 · « **Reply #2491 on:** January 11, 2011, 01:49:48 PM »

easy fix

CptBenSisko · « **Reply #2492 on:** January 11, 2011, 02:58:16 PM »

Quote from: baz1701 on January 11, 2011, 01:49:48 PM

easy fix

Much be6tter Baz...and darran...as you can see from your own picture..the name 'ENTERPRISE' is illuminated and the where the ships registry is, is illuminated...but the port and starboard floodlights are not...

Darran · « **Reply #2493 on:** January 11, 2011, 03:09:19 PM »

Actually if you look at the pic below, the red line is the centre line of the saucer, and the blue line is the light beam coming from the circled light source

AdmiralKathryn · « **Reply #2494 on:** January 11, 2011, 03:42:54 PM »

To me the light circled in blue on your image is the front one. It looks like the red line on mine is more the central axis, give or take a couple of degrees.

baz1701 · « **Reply #2495 on:** January 11, 2011, 03:55:19 PM »

I'm using this cap for ref with no warp blurring.

there are two faint lights coming off the sides.

tiqhud · « **Reply #2496 on:** January 11, 2011, 05:43:22 PM »

good choice, shows them well.

baz1701 · « **Reply #2497 on:** January 11, 2011, 05:44:39 PM »

new bridge under way

CptBenSisko · « **Reply #2498 on:** January 11, 2011, 09:14:03 PM »

i know its not finished...but that bridge looks like its being sucked outside in towards the center of the saucer....check out Wileys Bridge...that one is near perfect...youve done everything well so far..keep it up...

Its more or less just too tall ya get what im saying?

Joshmaul · « **Reply #2499 on:** January 12, 2011, 05:26:11 AM »

Quote from: CptBenSisko on January 11, 2011, 09:14:03 PM

Its more or less just too tall ya get what im saying?

I see it too - don't change the width of it, change the height. Smush it down a little bit.

News:

Author Topic: Baz1701 WIP's - Semi retired. (Read 450012 times)