Author Topic: Baz1701 WIP's - Semi retired. (Read 493068 times)

Adonis · « **Reply #3360 on:** September 23, 2011, 06:09:51 PM »

Quote from: baz1701 on September 23, 2011, 04:30:39 PM

Ok if I convert to Mesh then check it is upto 12.5K. Alas my hope of 10K is out the window asI still have no neck or nacelles.

Plus the detailing of the neck will get that up even more (the section where it meets the sec hull). you could go over the mesh again after you're done and shave off what you really do not need.

baz1701 · « **Reply #3361 on:** September 23, 2011, 06:49:54 PM »

we'll see what it ends up being.

RifleMan80 · « **Reply #3362 on:** September 23, 2011, 07:28:10 PM »

We do need more D-7/K'tinga Battlecruisers out there! Nice work so far

Lionus · « **Reply #3363 on:** September 23, 2011, 09:47:42 PM »

It'll be a shame to blow that one up..

DMWalsh79 · « **Reply #3364 on:** September 23, 2011, 09:59:20 PM »

let's see... we have a V'Ger...we have a TMP Connie...we have an Epsilon 9 and Drydock...do we have a TMP music pack to go along with the rest of your work Baz?

CyAn1d3 · « **Reply #3365 on:** September 25, 2011, 04:12:41 AM »

Hail to Okuda!!!

looks good Baz!

Captain_D · « **Reply #3366 on:** September 25, 2011, 08:36:00 PM »

Quote from: Adonis on September 23, 2011, 06:09:51 PM

Plus the detailing of the neck will get that up even more (the section where it meets the sec hull). you could go over the mesh again after you're done and shave off what you really do not need.

Agreed, but I would hate to see any of this detail have to go.

The K'tinga looks fantastic and it isn't even finished yet.

This project is definitely showing off your skills, a well deserved cookie.

Adonis · « **Reply #3367 on:** September 26, 2011, 04:57:26 AM »

Quote from: Captain_D on September 25, 2011, 08:36:00 PM

Agreed, but I would hate to see any of this detail have to go.

The K'tinga looks fantastic and it isn't even finished yet.

This project is definitely showing off your skills, a well deserved cookie.

The thing is to keep the detail with the less polies possible, and that isn't easy ;)

baz1701 · « **Reply #3368 on:** September 26, 2011, 12:22:09 PM »

Model done tad over 19K

moed · « **Reply #3369 on:** September 26, 2011, 12:48:29 PM »

Excellent Baz.

19k isn't too bad at all.

Thanks for all the fine work you've blessed us with!

Cookie for you.

086gf · « **Reply #3370 on:** September 26, 2011, 02:15:39 PM »

Wow that is just pure awesomeness right there! Would it be a safe bet to say that you will be doing a tmp, Qonos 1 and DS9 versions?

Shadowknight1 · « **Reply #3371 on:** September 26, 2011, 02:41:13 PM »

Have a cookie baz. Great job with the K'tinga.

Adonis · « **Reply #3372 on:** September 26, 2011, 07:44:20 PM »

Quote from: baz1701 on September 26, 2011, 12:22:09 PM

Model done tad over 19K

You can do better than that Baz ;) Optimize the thing :angel I saw quite a few spots on you wires that you showed earlier. Post some new ones and I'll point them out if you're not sure.

starship · « **Reply #3373 on:** September 27, 2011, 08:03:26 AM »

Looks excellent Bazz!

baz1701 · « **Reply #3374 on:** September 27, 2011, 02:17:07 PM »

Always open to advise.

Here are the Wireframes.

Adonis · « **Reply #3375 on:** September 27, 2011, 02:53:10 PM »

First off, could you render bigger resolution pics, like 1280x980 px? These are too small to really pick out small details.

Second, add some perspective ones too.

Now, so far: you have segments on the side "walls" of the head base that you really don't need (you really need only 3: the two end ones, and that one in the middle for the top portion where it drops after the bridge dome). Also, the sec hull bottom dome has too many segments, same goes for the spherical part of the head, more than you realistically need, I'll get back on you on that one, I can explain what to do with those two better with pix.

baz1701 · « **Reply #3376 on:** September 27, 2011, 04:50:53 PM »

Start to look at the cobra head first.

Here are some larger renders.

Phoenix Bondi · « **Reply #3377 on:** September 28, 2011, 04:29:30 AM »

:angel baz did i tell u just how much i hate you?

it is all envy though i promise

i am amazed - I would be honored if i can steal this off u later for my rommies

Adonis · « **Reply #3378 on:** September 28, 2011, 06:03:59 AM »

Hmm...it's worse than I thought. Could you wait until say Tuesday or Wednesday? I'll have enough time then to help you out, I have exams on Monday and Tuesday (Oct 3rd and 4th).

baz1701 · « **Reply #3379 on:** September 28, 2011, 08:03:42 AM »

Done alittle playing in my lunch break and have it down to 17,004 polys.

News:

Author Topic: Baz1701 WIP's - Semi retired. (Read 493068 times)