Author Topic: Baz1701 WIP's - Semi retired. (Read 488487 times)

baz1701 · « **Reply #4660 on:** February 23, 2013, 07:23:07 AM »

No fear everything is back up this time around

Some spec and lighting tests. I have also added a blue hue to the hull colour.

tiqhud · « **Reply #4661 on:** February 23, 2013, 08:21:18 AM »

ONE word

[nope apologize that's an emoction-con]

Shadowknight1 · « **Reply #4662 on:** February 23, 2013, 10:57:15 AM »

Seconded.

newhalo123 · « **Reply #4663 on:** February 23, 2013, 12:52:12 PM »

Quote from: Shadowknight1 on February 23, 2013, 10:57:15 AM

Seconded.

Thirded.... Is that a word? No? Well, too bad. Thirded:

Vortex · « **Reply #4664 on:** February 23, 2013, 01:43:03 PM »

Forthdedededed!!!!

hobbs · « **Reply #4665 on:** February 23, 2013, 05:01:17 PM »

impressive

baz1701 · « **Reply #4666 on:** February 23, 2013, 07:11:54 PM »

Thanks

More detail

Shadowknight1 · « **Reply #4667 on:** February 23, 2013, 07:27:53 PM »

Only suggestion I have is with the fins on the engines, making the textures hide the fact that they pop up a little better.

baz1701 · « **Reply #4668 on:** February 24, 2013, 03:02:52 AM »

It is a specs issue.

Lord Tribble · « **Reply #4669 on:** February 24, 2013, 07:14:12 AM »

ooo pretty. Glad you haven't gone overly blue with the hull colour, nice and subtle.
Tobias's can look a little too dark grey/blue sometimes; I'd say yours is pretty spot on

The colour in the nacelle 'vents' looks perfect

Don't know if you've finished them yet, but the blue strip lights under the nacelle hoods(?) should be brighter blue, leaning towards white, with some light spread down the adjacent surface. The same 'near-white' blue is used for just about all of the exposed light strips judging by screenshots (along the 'spine' on the top of the saucer, behind the deflector, nacelle hoods + opened fins etc).

Shadowknight1 · « **Reply #4670 on:** February 24, 2013, 12:31:35 PM »

Quote from: Lord Tribble on February 24, 2013, 07:14:12 AM

ooo pretty. Glad you haven't gone overly blue with the hull colour, nice and subtle.
Tobias's can look a little too dark grey/blue sometimes; I'd say yours is pretty spot on

The colour in the nacelle 'vents' looks perfect

Don't know if you've finished them yet, but the blue strip lights under the nacelle hoods(?) should be brighter blue, leaning towards white, with some light spread down the adjacent surface. The same 'near-white' blue is used for just about all of the exposed light strips judging by screenshots (along the 'spine' on the top of the saucer, behind the deflector, nacelle hoods + opened fins etc).

I think the colors of the lights under the cowl are fine, though it looks like you have three small lines at the very back instead of the one bigger line. Only a nitpick.

baz1701 · « **Reply #4671 on:** February 24, 2013, 05:07:40 PM »

Got the warp drive parts sorted out. This will use warp warp up to texture swap and ftech to open the fins.

Shadowknight1 · « **Reply #4672 on:** February 24, 2013, 07:29:55 PM »

Looks really good, but I do have a few suggestions regarding the bussards. Mostly I think it should be a deeper shade of blue and there should be a spot in the very center that's white/blue.

To show what I mean.

The deflector looks good as well since it's a texture, not a model change. But two deflectors would be overkill.

Really can't wait to see the final result.

EDIT: Removed large pic and linked instead, also have a cookie.

baz1701 · « **Reply #4673 on:** February 25, 2013, 04:16:05 AM »

The video is the bussard at warp. I will look at adding the glow in the middle.

Lord Tribble · « **Reply #4674 on:** February 25, 2013, 08:25:21 AM »

Quote from: Shadowknight1 on February 24, 2013, 07:29:55 PM

Looks really good, but I do have a few suggestions regarding the bussards. Mostly I think it should be a deeper shade of blue and there should be a spot in the very center that's white/blue.

To show what I mean.

The deflector looks good as well since it's a texture, not a model change. But two deflectors would be overkill.

Really can't wait to see the final result.

EDIT: Removed large pic and linked instead, also have a cookie.

That pic shows exactly what I was trying (and likely failing) to describe about the lights under the edge of the 'hoods'

Baz, that video is hypnotic lol!

Just looking at that front angle, don't forget the intake/vents/black bits (?) on the front edge of the fins

Shadowknight1 · « **Reply #4675 on:** February 25, 2013, 10:29:59 AM »

I'm sure he's getting there.

Baz, that picture also shows what I meant about there being a pattern on the outside part of the collector. Not sure if that can work with a transparency or not in BC though.

baz1701 · « **Reply #4676 on:** February 25, 2013, 10:40:13 AM »

I won't be able to add the grid pattern for BC the lines are too fine to show up. Likewise not sure the glows from the spot lights. The bussard light source is behind the fan and you cannot use the _glow prefix on a animated texture. Hopefully this will be fixed in Excalibur.

moed · « **Reply #4677 on:** February 25, 2013, 01:30:05 PM »

Looks awesome!

hobbs · « **Reply #4678 on:** February 25, 2013, 01:32:07 PM »

baz i know this will be all wrong lol but is it possible to use the material settings in Nifscope to create the glow you said cant be used on the animated textures.

just an idea (probably wrong)

baz1701 · « **Reply #4679 on:** February 26, 2013, 05:50:39 PM »

Started the top of saucer aztec

News:

Author Topic: Baz1701 WIP's - Semi retired. (Read 488487 times)