Author Topic: A simple Question For thouse who like to take Pics of empty Bridges... (Read 6603 times)

bankruptstudios · « **on:** July 23, 2009, 06:15:27 AM »

I'v been sifting through the content in this forum but i can't seem to find my answer. Who does one go about removing the crew from the bridge to make screen shots? I have the relieve crew mod but then they always turn the chairs. I would like to take pic of the bridges with all chairs empty and facing forward. Would it also be possible to jest make them inviable or is there a way to disable them temporarily? I have KM and most all the bridges. Any help?

teleguy · « **Reply #1 on:** July 23, 2009, 08:33:41 AM »

I think the shots of empty bridges are taken with MPE.
http://bridgecommander.filefront.com/file/Bridge_Commander_SDK;2455

bankruptstudios · « **Reply #2 on:** July 23, 2009, 08:42:25 AM »

Cool, i'm downloading it now and will let you know if this is what i need. Thank you.

bankruptstudios · « **Reply #3 on:** July 23, 2009, 09:24:43 AM »

It works, but i can't load the textures. Is there a way to see the bridge in game with out the crew?

Dalek · « **Reply #4 on:** July 23, 2009, 09:31:01 AM »

The textures aren't loading cos of the way you ahve to set MPE up...but I can't for the life of me remember how to. *bangs head against wall*

bankruptstudios · « **Reply #5 on:** July 23, 2009, 09:59:44 AM »

Don't bang your head, you might blow one of your...... bulb thingies. :lol:

Bones · « **Reply #6 on:** July 23, 2009, 10:25:48 AM »

there should be reg file in ModelProperty Editor folder, click on it and allow it to register MPE in windows, it works allways for me ;)

JimmyB76 · « **Reply #7 on:** July 23, 2009, 10:47:57 AM »

Quote from: bankruptstudios on July 23, 2009, 09:24:43 AM

It works, but i can't load the textures.

be sure the bridge nif itself is in the same folder as all the textures...
if it is not, then simply copy it into the folder w/textures...

bankruptstudios · « **Reply #8 on:** July 23, 2009, 11:05:24 AM »

Great info guys, i'll try it, thank you. :lol:

bankruptstudios · « **Reply #9 on:** July 23, 2009, 01:29:44 PM »

Ok, it work, crack one up to you guys. I'd give you all a cookie, but din't know how. Now my next question is how to keep the screen striate. I go in the bridge to look around and next thing i know it's upside down.

teleguy · « **Reply #10 on:** July 23, 2009, 01:35:58 PM »

It just occured to me that you can also use Nifskope instead of MPE. It's a lot easier to control.

http://niftools.sourceforge.net/wiki/NifSkope

bankruptstudios · « **Reply #11 on:** July 23, 2009, 02:13:42 PM »

It would be nice to have more control, but the link page wont let me down load. ERROR 500. I'm registered with the site. Guess it does not exist any more.

teleguy · « **Reply #12 on:** July 23, 2009, 02:16:21 PM »

Here's the direct link. http://sourceforge.net/projects/niftools/files/nifskope/1.0.9/nifskope-1.0.9-windows.exe/download

JimmyB76 · « **Reply #13 on:** July 23, 2009, 02:27:42 PM »

i dunno about nifskope... i find alot of the time textures dont load properly (or at all) even if the nif is in the same folder as the textures...
could be just me, tho...

Dalek · « **Reply #14 on:** July 23, 2009, 02:47:24 PM »

I think its just you Jim.

JimmyB76 · « **Reply #15 on:** July 23, 2009, 02:54:58 PM »

dunno what to say, then... it is unfortunate that nifskope doesnt seem to work properly for me when it comes to loading bridges

i wish i could troubleshoot why; it is much easier to navigate than MPE...

bankruptstudios · « **Reply #16 on:** July 23, 2009, 03:08:22 PM »

here you. Nifscope is super easy to NAV, put i can't get textures to load... Got any ideas?

Dalek · « **Reply #17 on:** July 23, 2009, 03:12:10 PM »

Is the nif in the same folder as the textures? That should do the trick.

JimmyB76 · « **Reply #18 on:** July 23, 2009, 03:23:26 PM »

Quote from: Dalek on July 23, 2009, 03:12:10 PM

Is the nif in the same folder as the textures?

Quote from: JimmyB76 on July 23, 2009, 02:27:42 PM

i find alot of the time textures dont load properly (or at all) even if the nif is in the same folder as the textures...

perhaps it isnt just me having that weird issue?
dunno what to say...

bankruptstudios · « **Reply #19 on:** July 23, 2009, 03:29:48 PM »

in render settings i hit textures auto detect pathways and it loaded all the textures except for a hand full of lcar panels. Outher wise good call to all of you. Now if someone would kindly tell me how to give you cookies, you'll get a bunch.

News:

Author Topic: A simple Question For thouse who like to take Pics of empty Bridges... (Read 6603 times)