Author Topic: Trek XI Enterprise (Read 24014 times)

Dalek · « **Reply #60 on:** November 24, 2008, 12:19:16 PM »

OOoooh, this has my interest.

baz1701 · « **Reply #61 on:** November 24, 2008, 12:31:54 PM »

well after the headaches we are having getting the old one exporting not sure if this one won't give the same amount of grief!

baz1701 · « **Reply #62 on:** December 03, 2008, 09:56:42 AM »

Well since the old ship was no good for exporting or scripting I've decided to give it another go.

I will attempt to do as much a I can with this one myself.

Note the saucer and engines are from the old ship and will be replaced on the new one. Basicly the un-textured bits are the new ones.

WileyCoyote · « **Reply #63 on:** December 03, 2008, 12:01:37 PM »

The bussard collectors look a little flat. They should be round like a ball The extra details like the bridge, impulse engines, and the under saucer sensor are either too small or too big.

baz1701 · « **Reply #64 on:** December 03, 2008, 12:11:29 PM »

All parts I intend to rebuild from scratch.

baz1701 · « **Reply #65 on:** December 04, 2008, 09:45:13 AM »

just a little update. New saucer and bridge module and the start of the impulse deck.

Kirk · « **Reply #66 on:** December 04, 2008, 11:08:10 AM »

This is already looking much better.

baz1701 · « **Reply #67 on:** December 04, 2008, 11:43:10 AM »

Thanks.

I think the nacells are to close together.

WileyCoyote · « **Reply #68 on:** December 04, 2008, 01:55:20 PM »

The nacelles are closer in than the true TOS Enterprise, but not that close. Also, I think the nacelles should be fully cylindrical, not squaring off at the ends.

baz1701 · « **Reply #69 on:** December 04, 2008, 06:18:59 PM »

another saucer rebuild. will add to the secondary hull later

WileyCoyote · « **Reply #70 on:** December 04, 2008, 08:54:22 PM »

I like it so far.

You might need to work on the impulse engine and the bridge a little more. It's looking like something that I built.......maybe it's the lighting setup.

Johnnymuffintop · « **Reply #71 on:** December 05, 2008, 03:30:15 AM »

Somebody's got to release this ship ASAP, whether it be Wiley or Baz.
I've got a model done by MadMan1701a, however it's a blender file and no one is willing to port it to either Legacy or Bridge Commander.

Kirk · « **Reply #72 on:** December 05, 2008, 03:32:08 AM »

asap = when it's done
Also, what does your post have to do with either of their projects? If you want it ported, make a new thread, don't hijack others'.

baz1701 · « **Reply #73 on:** December 05, 2008, 04:29:55 AM »

Quote from: WileyCoyote on December 04, 2008, 08:54:22 PM

I like it so far. You might need to work on the impulse engine and the bridge a little more. It's looking like something that I buildt.......maybe it's the lighting setup.

Well to be honest I modeled the bridge after yours since it is the best ref I've seen of the ship.

baz1701 · « **Reply #74 on:** December 06, 2008, 06:17:53 PM »

More progress on the mark II

Captain_April · « **Reply #75 on:** December 06, 2008, 06:42:36 PM »

looks good! only thing is that from the side, nacelles look alittle huge at first glance. I look again, and I see something maybe alittle too big, but on the other hand, its reasonable. wierd optical effect. same thing with the distance between nacelles from the top view. looks too small first, then after a second glance, it's grown on me.

WileyCoyote · « **Reply #76 on:** December 06, 2008, 06:43:50 PM »

You're getting better at modeling the difficult parts. The nacelles are still too close together.

baz1701 · « **Reply #77 on:** December 07, 2008, 06:12:59 AM »

just wished I could get the neck right. mine still to blocky

baz1701 · « **Reply #78 on:** December 07, 2008, 08:07:45 AM »

nearly there just some fine detail to add, but feel almost ready to unwrap

Johnnymuffintop · « **Reply #79 on:** December 07, 2008, 08:34:10 AM »

Awwww, no shuttlebay...?

I know the shape of it doesn't seem like there is one, but there are shuttles with the registry 1701 on them, so there has to be one.

News:

Author Topic: Trek XI Enterprise (Read 24014 times)