Bridge Commander Central

BC Forums => BC Technical Support => Solved Problems => Topic started by: Trekky0623 on June 23, 2008, 12:51:25 AM

Title: Engineering Systems labeled as "???"
Post by: Trekky0623 on June 23, 2008, 12:51:25 AM

When I open up Engineering, shields and sensors are both labeled as "???".  Is there a section in the hardpoint where the systems are named?

Title: Re: Engineering Systems labeled as "???"
Post by: Kirk on June 23, 2008, 12:52:37 AM

I believe that is the result of more than one shield and/or sensor system being set as primary.

Title: Re: Engineering Systems labeled as "???"
Post by: MLeo on June 23, 2008, 07:33:53 AM

It is, basicly, you have multiple impulse/sensor/shield systems of which two or more are set to primary, you need at most one primary.

Title: Re: Engineering Systems labeled as "???"
Post by: Trekky0623 on June 23, 2008, 09:10:50 AM

Thanks guys, I solved it.

The problem was they were just named wrong.  It was the Vivace Class, and the Shield Generator was labeled in lowercase, and the Sensor Array was labeled "Deflector Dish".

Solved