Author Topic: New Canon Mid TNG Crew and Uniform Mod (Read 12730 times)

CaptainGMAN · « **Reply #20 on:** June 21, 2007, 06:35:20 PM »

Man that is good.

Jb06 · « **Reply #21 on:** June 23, 2007, 04:58:30 PM »

Been busy for the past few dates so i haven't been able to so anything.

i've just fixed the black on data's uniform like billz said, i'm just doing the same for the red uniform.

Billz · « **Reply #22 on:** June 23, 2007, 05:08:18 PM »

Perfect Data!

10/10

Mustang · « **Reply #23 on:** June 23, 2007, 09:25:28 PM »

*whistles*

Incredible Data. Looks better than the stock one. Defenitely.

Billz · « **Reply #24 on:** June 25, 2007, 04:12:29 PM »

Earlier in the thread I suggested that you use 'Lt Reg Barcley' as the male extra.

If your still interested, I found a pic of him in his TNG uniform with his rank as visible as possible.

If you like, I'll get to work as soon as I can on aquiring new lines for the TNG crew (IE: Sound of words taken from TNG)

Let me know where I can help out.

JimmyB76 · « **Reply #25 on:** June 25, 2007, 04:29:11 PM »

didnt Reg get promoted to full LT by First Contact tho? not that i think it would matter for this pack, since this is TNG-era anyway...

Jb06 · « **Reply #26 on:** June 25, 2007, 04:59:51 PM »

thanks billz. i must be honest this uniform texture is a pain in the butt. from some reason the black edge distorts badly depending on what head i use, so i've had to do each uniform different for each person. taking a lot longer than expected. i haven't done a lot of work on it in the past few days, but i will post an update soon. i've already started on wesley crushers head and uniform and riker, so there's not that much to do. its all down to the uniforms. thats what is taking so long.

Jb06 · « **Reply #27 on:** July 10, 2007, 01:32:03 PM »

Ok here's an update on welsey crusher. opinions please.

JimmyB76 · « **Reply #28 on:** July 10, 2007, 03:45:44 PM »

not bad! but it seems his head is a slight bit too narrow... or maybe his shoulders are too wide? i cant quite put my finger on it, something seems just a tad bit off...

Jb06 · « **Reply #29 on:** July 10, 2007, 04:37:27 PM »

Well thats using the medium body, i am probably going to use the small body. i'll post the pics when i change it to see if it was the shoulders.

EDIT: Just tried the small body, and the shoulders seem to be the same width. it might be the angle i taken the screen shots. give me 2 mins and i will try a different angle

EDIT: Here's a different head. better or worse?

i think the mouth needs adjusting a little bit

trekker670 · « **Reply #30 on:** July 10, 2007, 10:54:11 PM »

The second Wesley is better, but the face might need to be a little more round and just a little more jaw.

I'm not sure if this is allowed or not, but here is a picture from Memory Alpha (sorry if it is not, Im new. Feel free to delete)

BTW, how are you constructing the faces, from scratch or editing photo?

CaptainGMAN · « **Reply #31 on:** July 10, 2007, 11:21:03 PM »

Quote from: trekker670 on July 10, 2007, 10:54:11 PM

I'm not sure if this is allowed or not, but here is a picture from Memory Alpha (sorry if it is not, Im new. Feel free to delete)

BTW, how are you constructing the faces, from scratch or editing photo?

its all right.

and 2 looks beter.

Jb06 · « **Reply #32 on:** July 11, 2007, 03:18:05 AM »

Quote from: trekker670 on July 10, 2007, 10:54:11 PM

The second Wesley is better, but the face might need to be a little more round and just a little more jaw.

I'm not sure if this is allowed or not, but here is a picture from Memory Alpha (sorry if it is not, Im new. Feel free to delete)

BTW, how are you constructing the faces, from scratch or editing photo?

the faces are from scratch.

i'll try round the face abit more later one.

EDIT: Any better? changed the mouth and tried to round the face. also even the skin tone out more.

trekker670 · « **Reply #33 on:** July 11, 2007, 08:17:17 AM »

Much better, to me it looks like the head is long enough, so if you could increase the width a touch it would be perfect!

JimmyB76 · « **Reply #34 on:** July 11, 2007, 08:58:34 AM »

it looks like he is kinda biting his bottom lip lol
also - will he have Kiskas voice? cuz i think that would be incredibly funny!!! :lol:

Jb06 · « **Reply #35 on:** July 11, 2007, 09:05:21 AM »

right well i will make the bottom lip a tad bigger.

lol i could leave kiska's voice, but as the voyager mod, i will try to find the correct voice.

BTW jimmy do you think the head needs to be abit wider?

EDIT: taken into account trekker670's widening of crusher and jimmy's bigger lip. so here it is. you can also see a sneek preview of riker in the background

trekker670 · « **Reply #36 on:** July 11, 2007, 09:54:36 AM »

Lip looks good, as does Riker! but I think the head should be wider still.

JimmyB76 · « **Reply #37 on:** July 11, 2007, 09:55:26 AM »

Quote from: Jb06 on July 11, 2007, 09:05:21 AM

BTW jimmy do you think the head needs to be abit wider?

hmmmm it's so tough to say, because it is so close... maybe just a tad bit...

Jb06 · « **Reply #38 on:** July 11, 2007, 12:25:54 PM »

Well my milkshape 30 day trial has run out so adjusting the heads might be hard now. i've got no money because i've just bought a new laptop, after dropping my old one and also buying photoshop cs3.

Opinions does the crusher head look that bad?

Nighthawk · « **Reply #39 on:** July 11, 2007, 02:05:18 PM »

lol, we do need new heads and crewmen. I'm planning to do a new crew with new models, but that's on my already way-too-long to-do list

I don't know if you edited Wesley's lips from the model or the texture, but except that, it looks nice.
so, this texture and head, with the previous lip, would do.
Data looks awesome. fits just like on the show.
Riker does need a bit of work, tho. too cartoonish.

News:

Author Topic: New Canon Mid TNG Crew and Uniform Mod (Read 12730 times)

trekker670

trekker670

trekker670