Author Topic: Constellation Class MSD (Read 1998 times)

Darran · « **on:** July 15, 2007, 04:45:12 PM »

Inspired by the recent Constitution MSD, I began working on this, i'm working roughly off gilsos schematic, im very busy so its going slowl, comments and criticism welcome as always

Shot at 2007-07-16

JimmyB76 · « **Reply #1 on:** July 15, 2007, 08:28:56 PM »

excellent!

Nebula · « **Reply #2 on:** July 15, 2007, 11:43:18 PM »

indeed very excellent!!

ACES_HIGH · « **Reply #3 on:** July 16, 2007, 12:47:10 AM »

nice job so far, one thing you should consider though is that the middle area of the saucer has a whole bunch of shuttle bays, not just the one

Bones · « **Reply #4 on:** July 16, 2007, 04:30:32 AM »

I think it won't look good when you'll put port and starboard saucer shuttle bays on MSD it'll take most of space there but that's up to you, excellent work !

Darran · « **Reply #5 on:** July 16, 2007, 06:43:15 AM »

No i wont be putting the port and starboard bays in, as mentioned it will take up far too much space

Darran · « **Reply #6 on:** July 17, 2007, 04:11:40 PM »

Minor update, started fleshing out the interior

RhVaurek · « **Reply #7 on:** July 17, 2007, 05:22:36 PM »

Very nice, reminds me of starship creator

Im just watching the TNG episode peak performance and the Hathaways bridge has a MSD that looks alot like that so your doing well.

Nighthawk · « **Reply #8 on:** July 18, 2007, 01:48:32 AM »

humm, I'm just curious....
aren't those pylons supposed to be just,... well... pylons? the Constellation is basically a dish with nacelles.
I'm not sure if they had decks on them. most likely they have Jeffries tubes, if any, but not a deck as we know them.

DJ Curtis · « **Reply #9 on:** July 18, 2007, 02:37:58 AM »

agreed. i highly doubt there would be livable decks in those pylons. they're pretty small.

Darran · « **Reply #10 on:** July 18, 2007, 07:46:37 AM »

I think im gonna keep them in, from the schematic they look like service decks, akin to the lower decks on voyager

Darkthunder · « **Reply #11 on:** July 18, 2007, 06:20:42 PM »

Found these on Scifi-Meshes, made by a guy called "Commandersozo". Perhaps it will give some ideas as to how to proceed

Mustang · « **Reply #12 on:** July 19, 2007, 11:03:44 AM »

Looks good! What program are you using? Or did I miss it...

Nighthawk · « **Reply #13 on:** July 19, 2007, 12:00:49 PM »

isn't it "Master Situation" instead of "Master Systems"?

Darran · « **Reply #14 on:** July 19, 2007, 06:19:11 PM »

Im using Adobe Illustrator CS2

Mustang · « **Reply #15 on:** July 20, 2007, 03:10:57 PM »

Damn it. I wish I could afford that... I'm stuck with the old Elements 2.0.

Ah well, enough about my problems lol. The schematics look good.

Bones · « **Reply #16 on:** July 20, 2007, 05:28:16 PM »

CSI have old elements LOL strange prog but also I have Ilustrator CS ... even more strange program. As far as I know it should be MASTER SITUATION on that MSD display, great job, would be great if someone could use it to retexture ambassador bridge to look as close as possible as constellation class bridge

Darran · « **Reply #17 on:** July 20, 2007, 10:25:33 PM »

im buildin a constelation set, v slowly, v2 is in the enterprise project, but im workin on v3

RhVaurek · « **Reply #18 on:** July 21, 2007, 06:20:58 AM »

Sounds and looks good all the way.

Darran · « **Reply #19 on:** September 03, 2007, 04:15:30 PM »

major update, still not finished, i let this one idle for a while

News:

Author Topic: Constellation Class MSD (Read 1998 times)

RhVaurek

RhVaurek