Author Topic: Generations And Excalibur Bridge Viewpoint Problems (Read 4612 times)

Billz · « **on:** December 25, 2007, 07:42:31 AM »

If I remember correctly, this exact same thing happened on the Ambassador bridge when it was first released.

Anyway, when starting on the Generations bridge, your viewpoint is in the tatical controls, behind the command chair but infront of the guy at tactical.

You are actually standing in the tactical controls.

Also, when walking forward, I couldn't walk very far infront of the command chair, like there was some invisible thing blocking my path. I could walk around the rest of the bridge just fine.

Sounds like an animation problem. Well done on the awesome bridge though.

On the Excalibur bridge, I end up starting stuck in the middle of the floor infron of the command and XO chairs.

Capt. Jon · « **Reply #1 on:** December 25, 2007, 01:10:52 PM »

Yea, I noticed that with the Gen bridge.. and she is my favorite! hope we can get a fix for that

Eagleeye · « **Reply #2 on:** December 25, 2007, 03:11:35 PM »

Yea, I noticed that too, I had the issue with the Excalibur Bridge since the release in KM

PJB · « **Reply #3 on:** December 25, 2007, 03:45:17 PM »

I'm experiencing the same problems as Billz with the Generations and Excalibur bridges.

MLeo · « **Reply #4 on:** December 25, 2007, 03:51:22 PM »

Looking into this... Hang on...

MLeo · « **Reply #5 on:** December 25, 2007, 03:55:55 PM »

I'm afraid I haven't been able to reproduce this problem on the Generations bridge.

intrepid90 · « **Reply #6 on:** December 25, 2007, 04:00:43 PM »

yeah, I don't have it aswell...
but another prob...
one of the 2 birdges disabled the bridge scrolling button

MLeo · « **Reply #7 on:** December 25, 2007, 04:05:46 PM »

Did you activate, or deactivate, the Sneaker Bridge Menu Scroller mutator?

And did you install any of the earlier released bridges as well?

Also, going back to the original problem, it sounds to me in the first post that corrected in KM, am I correct?

PJB · « **Reply #8 on:** December 25, 2007, 04:07:13 PM »

Quote from: intrepid90 on December 25, 2007, 04:00:43 PM

yeah, I don't have it aswell...
but another prob...
one of the 2 birdges disabled the bridge scrolling button

I had this problem as well Intrepid90, I just reinstalled Bridge Plugin Core (Gold) and that fixed it.

Billz · « **Reply #9 on:** December 25, 2007, 04:10:32 PM »

Quote from: MLeo on December 25, 2007, 04:05:46 PM

Did you activate, or deactivate, the Sneaker Bridge Menu Scroller mutator?

And did you install any of the earlier released bridges as well?

Also, going back to the original problem, it sounds to me in the first post that corrected in KM, am I correct?

The Excalibur bridge problem wasn't evident in the KM version.

However, the aforementioned problems in the single releases of the Generations and Excalibur bridges are still evident.

Also, I cant seem to turn the EF2 crew off. Even with the fix you provided in a different thread here on BCC.

Jb06 · « **Reply #10 on:** December 25, 2007, 05:07:50 PM »

Quote from: intrepid90 on December 25, 2007, 04:00:43 PM

yeah, I don't have it aswell...
but another prob...
one of the 2 birdges disabled the bridge scrolling button

I think it was an updated sneaker bridge menu script which was out of date in the excelsior pack. either reinstall BPG or find the script in km1 in custom/sneaker. thats what i done.

Quote from: Billz on December 25, 2007, 04:10:32 PM

Quote from: MLeo on December 25, 2007, 04:05:46 PM
Did you activate, or deactivate, the Sneaker Bridge Menu Scroller mutator?

And did you install any of the earlier released bridges as well?

Also, going back to the original problem, it sounds to me in the first post that corrected in KM, am I correct?

The Excalibur bridge problem wasn't evident in the KM version.

However, the aforementioned problems in the single releases of the Generations and Excalibur bridges are still evident.

Also, I cant seem to turn the EF2 crew off. Even with the fix you provided in a different thread here on BCC.

The problem on excalibur was in km1 when you start a qb using the excalibur bridge.

As for the generations bridge, its something to do with the generations script, which ive had before on a bridge and can easily be fixed.

As for the EF2 crew, you should have read the readme. It replaces the stock crew so you can't get rid of them. Though in cases, like my voygaer crew conversion will still work as i directed them to alternate models.

All you can do it by getting the original crew scripts in bridges/crew on an old install and replace them with the ef2 with them, then edit the ef2 scripts, rename them all like ef2saffi etc and change it in the autoload. Its abit brief, but catch me over msn if you dont get it.

~Jb06

JLS

MLeo · « **Reply #11 on:** December 25, 2007, 05:30:45 PM »

My fix does that, except for including the original crew files, which I said in that post to do (swap out with the original files).

[EDIT]
So there you have it, for Sneakers Menu Scroller, and the bridge problems, reinstall BP Core Gold.

PJB · « **Reply #12 on:** December 25, 2007, 06:06:17 PM »

Quote from: MLeo on December 25, 2007, 05:30:45 PM

[EDIT]
So there you have it, for Sneakers Menu Scroller, and the bridge problems, reinstall BP Core Gold.

Hi MLeo,

I'm still having the Generations And Excalibur Bridge problems mentioned by Billz? Reinstalling BP Core Gold only fixes the bridge menu scroller problem.

MLeo · « **Reply #13 on:** December 25, 2007, 06:09:26 PM »

Not according to Jb06

Quote from: Jb06 on December 25, 2007, 05:07:50 PM

As for the generations bridge, its something to do with the generations script, which ive had before on a bridge and can easily be fixed.

Billz · « **Reply #14 on:** December 25, 2007, 06:27:19 PM »

Ive reinstalled BPCore Gold twice. I deleted the pyc files to make sure. Still getting problems on the bridges mentioned.

Jb06 · « **Reply #15 on:** December 25, 2007, 07:58:32 PM »

Ok Generations Galaxy problems with the captain sitting in the tactical seat has been fixed so you sit in the captains seat. Also ive fixed the excalibur so then you sit in the captains sit, not kissing your XO feet.

The two pys attached should go in

Scripts/bridge

You can all thank me via a cookie

~Jb06

JLS

Billz · « **Reply #16 on:** December 25, 2007, 08:08:32 PM »

*Cookie torpedo locked on. Firing. Direct hit!*

Thank you Jb06.

Thank you too Mleo.

Thank you to all the 3rd Era crew that make all these bridges a reality.

Capt. Jon · « **Reply #17 on:** December 25, 2007, 08:49:45 PM »

TY very much guys for the Generations bridge fix!

You guys deserve a very merry christmas! and thank you! you guys ARE the best!

intrepid90 · « **Reply #18 on:** December 26, 2007, 04:49:52 AM »

thanks for the help

Mark · « **Reply #19 on:** December 26, 2007, 06:03:01 AM »

Quote from: Jb06 on December 25, 2007, 07:58:32 PM

Ok Generations Galaxy problems with the captain sitting in the tactical seat has been fixed so you sit in the captains seat. Also ive fixed the excalibur so then you sit in the captains sit, not kissing your XO feet.

The two pys attached should go in

Scripts/bridge

So what was the problem, since Ive never been able to reproduce these issues I find it hard to debug.

News:

Author Topic: Generations And Excalibur Bridge Viewpoint Problems (Read 4612 times)

intrepid90

intrepid90