Bridge Commander Central

BC Forums => BC Modding => Topic started by: Starforce2 on January 27, 2012, 11:44:51 PM

Title: 2 sensor arrays
Post by: Starforce2 on January 27, 2012, 11:44:51 PM

What is the proper procedure for adding dual sensor arrays?

Title: Re: 2 sensor arrays
Post by: Phoenix Bondi on January 28, 2012, 05:21:14 AM

hard points or modeling?

Title: Re: 2 sensor arrays
Post by: Nebula on January 28, 2012, 09:45:25 AM

he's talking about HP.

Title: Re: 2 sensor arrays
Post by: moed on January 28, 2012, 09:58:24 PM

As far as I know, it doesn't work in BC... but I'm not 100% sure.

I do know that usually, if there's more than one sensor array, they conflict with one another within the HP and you get a "?" in the engineering display.

Title: Re: 2 sensor arrays
Post by: Starforce2 on January 29, 2012, 12:50:14 AM

I have a luna I am working on that's got them and I know others have done it which was why I was askin.

Title: Re: 2 sensor arrays
Post by: FlowrellikX on February 08, 2012, 01:11:12 AM

hmm...... If it's just a sensor array. try this out.
make one Sensor as a Primary, THEN make a second sensor with a different name.
usually twin parts that are useful with a different name works. I did just that to the Yamato in giving him 2 Warp Cores XD.

Title: Re: 2 sensor arrays
Post by: GMunoz on February 16, 2012, 03:06:41 PM

Look at the HP for my TOS Intelligence Scout recently released.  It has 2 Sensor arrays.

Title: Re: 2 sensor arrays
Post by: Adonis on February 16, 2012, 04:46:59 PM

Just unthick "Primary" on the second one. Works for Warp Cores, hulls etc. too.