Author Topic: Cardassian Galor WIP: Recovered! (Read 21296 times)

King Class Scout · « **Reply #20 on:** September 04, 2011, 09:12:58 AM »

that's only a hair bigger in the poly count than the stock galor. now that's scrooging it!

Phoenix Bondi · « **Reply #21 on:** September 05, 2011, 09:38:59 AM »

head over to excaliber and cheak out adonis galaor - i must say Damn! im impressed!!

- makes me wish i was a better modeler

:eek

DJ Curtis · « **Reply #22 on:** September 05, 2011, 11:57:51 AM »

This is a nice mesh!

Starforce2 · « **Reply #23 on:** September 05, 2011, 02:22:19 PM »

that is indeed a good looking galor mesh. I hope you do the keldon and hidiki as we defenetly need good ones of those too. Plus cards are my favorite thing to shoot at.

serverandenforcer · « **Reply #24 on:** September 05, 2011, 05:18:54 PM »

I think I'm done with modeling out the head with the exception to the two spiral wave disruptors on the left and right side. I might add more stuff later on, but I have a lot more to do with the rest of the ship.

deadthunder2_0 · « **Reply #25 on:** September 05, 2011, 06:16:16 PM »

Tell me you are going to add detail to the bottom, and wings right?

Jb06 · « **Reply #26 on:** September 05, 2011, 06:32:11 PM »

Quote from: serverandenforcer on September 05, 2011, 05:18:54 PM

I think I'm done with modeling out the head with the exception to the two spiral wave disruptors on the left and right side. I might add more stuff later on, but I have a lot more to do with the rest of the ship.

Read carefully

Awesome mesh btw ;)

Captain_D · « **Reply #27 on:** September 05, 2011, 06:38:32 PM »

Detail so far is superb.

Very nice work, and cookie.

Adonis · « **Reply #28 on:** September 05, 2011, 06:39:21 PM »

Quote from: serverandenforcer on September 05, 2011, 05:18:54 PM

I think I'm done with modeling out the head with the exception to the two spiral wave disruptors on the left and right side. I might add more stuff later on, but I have a lot more to do with the rest of the ship.

Nice model you have here

The two grille extrusions on the aft of the heads top should be the same height as the bridge base.

serverandenforcer · « **Reply #29 on:** September 05, 2011, 07:02:56 PM »

Quote from: Adonis on September 05, 2011, 06:39:21 PM

Nice model you have here The two grille extrusions on the aft of the heads top should be the same height as the bridge base.

Good spot! ;) It twas an easy fix.

It did also help find a mesh error with something else too.

086gf · « **Reply #30 on:** September 05, 2011, 07:07:56 PM »

Nice, how do/will you have it scaled? 300ish meters or the 3/4ths Galaxy class scale like the actual original model intent and Ambassador?

serverandenforcer · « **Reply #31 on:** September 05, 2011, 08:28:09 PM »

Quote from: 086gf on September 05, 2011, 07:07:56 PM

Nice, how do/will you have it scaled? 300ish meters or the 3/4ths Galaxy class scale like the actual original model intent and Ambassador?

I was actually reading up on this and the actual model was to scale with the the actual 6ft Galaxy class model, being 3/4 of the size of that ship. So I will be going with that.

Anyways, did a tad bit more work on the dorsal side and the tail section. kind of hard to do all of this and co-ordinate a bbq. :roll

EDIT: current poly (triangle) count (in Mesh mode) is at 8472.

Starforce2 · « **Reply #32 on:** September 06, 2011, 12:45:18 AM »

Quote from: serverandenforcer on September 05, 2011, 08:28:09 PM

kind of hard to do all of this and co-ordinate a bbq. :roll

Is it bring your own disruptor?

I can't wait to bbq this baby.

serverandenforcer · « **Reply #33 on:** September 06, 2011, 01:37:43 AM »

HAHA!

Actually, I think this ship has been severly under estimated in Trek lore. It's got an incredible weapons coverage over the entire ship.

Last one for the night. I know there are mesh errors on it, but I got to catch a flight tomorrow morning and need to get off to bed. Anyways, doing work on the ventral side of the hull now....

Nihilus · « **Reply #34 on:** September 06, 2011, 02:47:31 AM »

Quote from: serverandenforcer on September 06, 2011, 01:37:43 AM

HAHA!

Actually, I think this ship has been severly under estimated in Trek lore. It's got an incredible weapons coverage over the entire ship.

Last one for the night. I know there are mesh errors on it, but I got to catch a flight tomorrow morning and need to get off to bed. Anyways, doing work on the ventral side of the hull now....

That's a good looking Galor. It will be real nice to have a Galor not be canon fodder for once

tiqhud · « **Reply #35 on:** September 06, 2011, 09:37:44 AM »

I always figured Galors, were tougher, than let on to be, OH and cookie

Adonis · « **Reply #36 on:** September 06, 2011, 12:58:05 PM »

Quote from: serverandenforcer on September 05, 2011, 07:02:56 PM

Good spot! ;) It twas an easy fix. It did also help find a mesh error with something else too.

You can always add an STL Check modifier into the stack and let it show you where they are ;)

The forward cargodoor that you extruded is in fact an intrusion first of the whole rhomboid shape that surrounds it (minus the top extrusion above it) and then the door itself extrudes.

MarkyD · « **Reply #37 on:** September 07, 2011, 10:34:52 AM »

Nice work mate, looks real nice

serverandenforcer · « **Reply #38 on:** September 07, 2011, 11:43:38 AM »

Well right now I'm going through ground combat school at Ft. Wolter, Tx - about 1 hr and 15 minutes west of Fort Worth. I brought my laptop with me so that I can continue to work on this while I'm here. Not sure if I'll be able to post any updates because of limited wifi coverage (postion this from my phone). So the next update you all might see is when I get back.

moed · « **Reply #39 on:** September 07, 2011, 01:07:32 PM »

Great work on this dude.

Cookie for you!

News:

Author Topic: Cardassian Galor WIP: Recovered! (Read 21296 times)