Author Topic: Cinqnic WIP's 3d printer ship (Read 69201 times)

JimmyB76 · « **Reply #500 on:** August 30, 2012, 03:17:43 PM »

yeah i agree - something between the two would be just right, IMO...

KrrKs · « **Reply #501 on:** August 31, 2012, 06:34:00 AM »

After looking at some Photos from the Model I think that the thin version is closer to that.
Only the Middle Part, behind the Shuttlebay, where the radiators sit (or whatever they are), could be a tad thicker.

cinqnic · « **Reply #502 on:** September 21, 2012, 11:06:54 AM »

hi ship is done i need someone to finish her off, ive exported it to bc format but the glows need doing and the hard pointing. i ve put a rough guide to where the glows are. so if you want to finish her off let me know
here a picture

~~~~~~~~~~~~NELSON UPDATE~~~~~~~~~~~

The Nelson is all done well it need glows and hard points, It has MVAM so who ever does the hard points for me need to know how to do that. drop me message

moed · « **Reply #503 on:** September 21, 2012, 12:54:36 PM »

That looks fantastic!

Cookie for you

King Class Scout · « **Reply #504 on:** September 22, 2012, 09:09:58 AM »

and me without a usable computer! I woulda pounced on that in a new-york minute!

cinqnic · « **Reply #505 on:** September 24, 2012, 03:26:59 PM »

right time to get this one sorted out galaxy adder refit. The nelson & olympic have been sent off for hard pointing, just keep getting the reg the wrong way round lol

Vortex · « **Reply #506 on:** September 24, 2012, 03:42:12 PM »

Not sure about that impulse engine. I'd have maybe put the shuttle bay there instead.

HOWEVAH!! The rest looks great! Maybe add a slightly steeper rise to the top of the secondary hull? It breaks the flow of the lines a little in the side profile.

andyp · « **Reply #507 on:** September 24, 2012, 07:17:58 PM »

maybe take some inspiration from the allegiance class and or venture class from sto?

WileyCoyote · « **Reply #508 on:** September 24, 2012, 08:52:37 PM »

Correct me if I'm wrong, but the deflector of the engineering hull looks like it was taken from a another ship...possibly the CG Sovereign? Unless you built it yourself- it looks nice.

The upper structure of the saucer looks strange for a Galaxy hybrid ship. It doesn't flow with the ship. But I agree with andyp, inspiration from the Allegiance class might make this ship look better. Try to Sovereign-ify the saucer a bit.

Lurok91 · « **Reply #509 on:** September 25, 2012, 05:05:39 AM »

If you could do an Olympic with a USS Nightingale reg, we could replace the old Olympic model we currently have in the SP Mod.

cinqnic · « **Reply #510 on:** September 26, 2012, 11:19:35 AM »

this ship will be coming soon aswell

U.S.S. Horatio NCC-10532-A

Little BACK STORY

The USS Horatio (NCC-10532) was an Ambassador-class heavy cruiser in service to Starfleet in the 24th century. From the 2340s to 2364, the Horatio was under the command of Captain Walker Keel. (TNG episode: "Conspiracy") In 2364, the Horatio rendezvoused with the USS Enterprise-D, the USS Renegade, and the USS Thomas Paine in orbit of Dytallix B so that Keel could discuss the possibility of a conspiracy in Starfleet Command with Captains Jean-Luc Picard, Tryla Scott and Rixx. Following this meeting, the Horatio was mysteriously destroyed in Sector 63. Starfleet Command believed the ship imploded and now the Horatio A is under his son Captin Jason W Keel,

yes it has the bridge section doubles up as a captains yacht,MVAM part
[/quote]

cinqnic · « **Reply #511 on:** October 06, 2012, 08:03:12 PM »

Both the Olympic & Nelson is available to down load now
http://bridgecommander.filefront.com/file/Uss_Pastuer_Olympic_class;121287
http://bridgecommander.filefront.com/file/Uss_Horatio_Nelson_Classsfsy;121288
check it out

cinqnic · « **Reply #512 on:** January 26, 2013, 05:59:44 PM »

Hi soz i hav not been on here for a bit but lost 2 family members.
any way been working on the sabre class redo still very early stages feed back welcome trying to stick close to the ship to the best of my skills

Phoenix Bondi · « **Reply #513 on:** January 27, 2013, 05:56:53 AM »

Welcome back mate, sorry for you loss, i know how that feels, lost 14 in space of 9 weeks ..... i don't think i've ever been that drunk in my life, some of the Italian side of the family we where celebrating life *more than mourning* and that insisted on lots of singing dancing and drinking, but as i said, glad ur back and i'll be keeping a close eye on this, it was one of the ones i thought about trying, but i'll do the Streamrunner or Norway class as i want to do a DS9/DW era after my couple of klingon ships

hobbs · « **Reply #514 on:** January 27, 2013, 06:19:11 AM »

yes condolences dude

ship is looking good

and phoenix... do the Norway she is a loverly ship and you'd do her justice

MarkyD · « **Reply #515 on:** January 30, 2013, 12:00:55 PM »

Nice models mate, you have done some gr8 work

cinqnic · « **Reply #516 on:** March 14, 2013, 05:08:29 PM »

Hi every been working hard. He some news I am planning to start my own business where I will be doing 3d model printing in plastic. With my software all the ships I've done for BC can be made into model made in plastic. The copyright is been looked at when it comes to ship base off Star Trek and other ship from tv & films.

If I could make you designs into plastic models would you buy them

hobbs · « **Reply #517 on:** March 16, 2013, 04:06:10 AM »

Yes defo...

Especially my Griffin Class http://bc-central.net/forums/index.php/topic,7411.msg200096.html#msg200096

and my Hornblower Class http://bc-central.net/forums/index.php/topic,7411.msg198309.html#msg198309

and i think the first would be the Uss Survey http://bc-central.net/forums/index.php/topic,7411.msg190385.html#msg190385 because though most despise this ship i love it (except you lionus you like it lol)

Locke · « **Reply #518 on:** March 17, 2013, 01:56:56 PM »

Quote from: cinqnic on March 14, 2013, 05:08:29 PM

Hi every been working hard. He some news I am planning to start my own business where I will be doing 3d model printing in plastic. With my software all the ships I've done for BC can be made into model made in plastic. The copyright is been looked at when it comes to ship base off Star Trek and other ship from tv & films.

If I could make you designs into plastic models would you buy them

I looked into doing this with DJ's ships awhile back. Aside from the obvious need to get his permission, I'm fairly sure you couldn't charge money for the ships, since copyright applies if you're using any Starfleet insignia or registry information from any Star Trek series. Another issue is that the poly count for BC will give you issues with 3D printing, because smoothing groups get tossed out in the transfer process. You would have to completely redesign every element of the ship, which seems almost too time-consuming for my tastes.

cinqnic · « **Reply #519 on:** March 17, 2013, 02:27:25 PM »

I use milkshape to build my models and I can export them to the right file type for my 3d printer software and them seem to look alright running in the software for my printer. Just got to print them out when it comes. Plus I won't be using any Starfleet insignia or registry information the ship will be in colour plastic for the person to paint and put what ever insignia they have.

News:

Author Topic: Cinqnic WIP's 3d printer ship (Read 69201 times)