Author Topic: E7's Retextures WIP ( Eximius Class ) (Read 23114 times)

FarShot · « **Reply #60 on:** January 09, 2011, 04:59:16 PM »

Well, yeah, that's continuous burning, but once the burning is done and it's cooled down to, say, the temperature of space, the metal becomes harder sometimes.

Nihilus · « **Reply #61 on:** January 09, 2011, 05:36:53 PM »

Well the burn marks aren't all that big of a deal but on some of the textures it appears the hull has several major cracks throughout it and it seems like those would pose a problem. As for Voyager, should could barely go Warp without chunks of hull plating being torn off. Plus Voyager had no Starbase to go home too. I would assumes the Terrans would.

Lionus · « **Reply #62 on:** January 09, 2011, 05:59:08 PM »

and being Terran Empire, while sitting on a space dock, they're easy targets for internal political plotting, backstabbing, poisoning, sabotage.. oh wait, that's happening anyways.

shade_30 · « **Reply #63 on:** January 09, 2011, 10:33:47 PM »

Judging from your wallpaper/render, I'd take it you want the phasers to remain red? =p

Textures look fine to me, makes it more interesting to imagine what kind of horrors or glorious battles they have faced =p
(And I doubt these buggers would like to hang around starbases for too long)
HP's are coming along, been quite busy lately but it's tuning down now, so got more time to work on them =)

EDD_7 · « **Reply #64 on:** February 16, 2011, 04:57:44 PM »

Well its been a while, the other projects are still going there just moving slowly

but they will be done..eventually.

I've been seeing alot of modeling done recently and i thought i might have a go again, This time i'm going for a small science vessel Its also a cross between the Sabre/Intrepid/Sovereign. Smoothing groups are just for play at the moment and won't be final. Roughly sitting at 2000 polys. The attached image is what i'm aiming at detail wise.

All for fun and practise ;) , Suggestions are gladly accepted. Oh and i'm using Gmax so no renders

Vedic · « **Reply #65 on:** February 17, 2011, 03:46:24 PM »

Nice Start, on what ever it.

EDD_7 · « **Reply #66 on:** February 17, 2011, 04:12:53 PM »

Quote from: Vedic on February 17, 2011, 03:46:24 PM

Nice Start, on what ever it.

its just what ever i feel looks good at the time, so i started it as a simple TOS shaped saucer ... not any more though.

Continued with "it" and refined the sides and started some work on the bottom of the saucer. I'm thinking of having the nacelles fall under the saucer, and perhaps having a pod on it somewhere depending on how it looks. 2 deflectors by the way

.

Another pic

EDIT: experiment with the deflectors

Vedic · « **Reply #67 on:** February 17, 2011, 04:38:41 PM »

Well "It" looks a lot better now, looks like late 24th Century, Scout/Science ship.

nicholson · « **Reply #68 on:** February 18, 2011, 01:02:03 PM »

looks a fair amount like this http://www.subspace-comms.net/index.php?topic=3618.0, but with a shorter, thinner engineering hull

EDD_7 · « **Reply #69 on:** February 18, 2011, 05:07:50 PM »

Quote from: nicholson on February 18, 2011, 01:02:03 PM

looks a fair amount like this http://www.subspace-comms.net/index.php?topic=3618.0, but with a shorter, thinner engineering hull

wow it is pretty close to that actually, but where i'm heading it won't look anywhere near that

some more pics, generally its starting to get tedious and i'm wondering how the great BC modders do it

. just under 5000 polies. all sort of smoothing still to be done, and the underside needs abit more detail somehow. i'll build the bridge next then the pylons....then come up with some sort of Nacelle.......and after all that i need to figure out how to attach it all.

Vedic · « **Reply #70 on:** February 18, 2011, 09:20:14 PM »

Looks like an Nova Replacement, And your trying to squeeze this thing under 5k Poly?

EDD_7 · « **Reply #71 on:** February 20, 2011, 03:56:15 PM »

Quote from: Vedic on February 18, 2011, 09:20:14 PM

Looks like an Nova Replacement, And your trying to squeeze this thing under 5k Poly?

No i'm trying to squeeze it under 10k polys, its just that bit thats 5k, And yes i was thinking the same thing about the nova replacement.If i can get it complete I want one of the registries to be the "USS Equinox 72381-A"

Now what looks better, pylons up or down. I want the pylons down because it not seen often but i'll go with what looks right.

Vortex · « **Reply #72 on:** February 20, 2011, 06:41:29 PM »

I think up looks better, at least with those pylons.

Darkthunder · « **Reply #73 on:** February 20, 2011, 08:20:23 PM »

I'd go with Pylons Up on that design, provided the nacelles aren't being blocked in the forward view by the saucer.

Vedic · « **Reply #74 on:** February 20, 2011, 11:50:47 PM »

it depends on what Nacelles, you use. But ATM, i like them facing down.

EDD_7 · « **Reply #75 on:** February 23, 2011, 05:09:03 PM »

I've decided the pylons are going down

I've also built some quite funky nacelles for my standards lol. Bridge section is next and some more details to the saucer section. i've also landed he with a name, USS Solstice NX 150792, Science vessel to the core

Pictures...what do you think

shade_30 · « **Reply #76 on:** February 23, 2011, 05:12:04 PM »

Looks nice Edd

WileyCoyote · « **Reply #77 on:** February 23, 2011, 05:19:40 PM »

That ship looks a slight bit like my Argonaut class. Looks nice though.

Captain_D · « **Reply #78 on:** February 23, 2011, 05:59:21 PM »

With the down position of the pylons, I think the aft section would make a nice platform for a Nebula Style weapons pod. Or possibly a Miranda or Akira style weapons bar.

Don't know if you want to go that way design wise, just an observation.

Looks neat so far.

moed · « **Reply #79 on:** February 23, 2011, 07:54:21 PM »

Not bad at all! I like where you're going with this.

News:

Author Topic: E7's Retextures WIP ( Eximius Class ) (Read 23114 times)