« previous next »
Pages: [1]   Go Down

Author Topic: Engineering Systems labeled as "???"  (Read 1301 times)

Offline Trekky0623

  • Posts: 17
  • Cookies: 1
Engineering Systems labeled as "???"
« on: June 23, 2008, 12:51:25 AM »
When I open up Engineering, shields and sensors are both labeled as "???".  Is there a section in the hardpoint where the systems are named?
Logged

Offline Kirk

  • Posts: 1438
  • Cookies: 139
    • My Released Mods
Re: Engineering Systems labeled as "???"
« Reply #1 on: June 23, 2008, 12:52:37 AM »
I believe that is the result of more than one shield and/or sensor system being set as primary.
Logged

Offline MLeo

  • Retired Staff
  • Posts: 3636
  • Cookies: 833
  • Software Simian
    • the Programming Pantheon
Re: Engineering Systems labeled as "???"
« Reply #2 on: June 23, 2008, 07:33:53 AM »
It is, basicly, you have multiple impulse/sensor/shield systems of which two or more are set to primary, you need at most one primary.
Logged
I still can't read peoples minds, nor can I read peoples computers, even worse, I can't combine the two to read what is going wrong with your BC install...

"It was filed under 'B' for blackmail." - Morse, Inspector Morse - The dead of Jericho.

Offline Trekky0623

  • Posts: 17
  • Cookies: 1
Re: Engineering Systems labeled as "???"
« Reply #3 on: June 23, 2008, 09:10:50 AM »
Thanks guys, I solved it.

The problem was they were just named wrong.  It was the Vivace Class, and the Shield Generator was labeled in lowercase, and the Sensor Array was labeled "Deflector Dish".

Solved
Logged
Pages: [1]   Go Up
« previous next »