Author Topic: WileyCoyote's WIPs - Continues to Lurk Around (Read 588442 times)

DJ Curtis · « **Reply #540 on:** January 23, 2009, 10:38:55 PM »

nice touch with the blue glows baked into the nacelles.

Good job on this, though I must admit that the more I see of the re-designed Enterprise, the less I like it. (The design, not your ship.)

WileyCoyote · « **Reply #541 on:** January 30, 2009, 11:02:16 PM »

The main Trek XI ships are about finished, but their HPs need tweaking. Also, ANYONE who posts reference pictures to any Star Trek XI ship or website SHOULD be posted in the Trek XI movie forum here on BCC. That's where it should be posted, and not here.

http://bc-central.net/forums/index.php/topic,2174.0.html

Anyways, I got speculars to finally work on the Excelsior.

Billz · « **Reply #542 on:** January 30, 2009, 11:12:33 PM »

Looks awesome.

Code: [Select]

Known Excelsiors
USS Al-Batani NCC-42995
USS Berlin NCC-14232
USS Cairo NCC-42136
USS Charleston NCC-42285
USS Crazy Horse NCC-50446
USS Crockett NCC-38955
USS Enterprise NCC-1701-B (refit)
USS Excelsior NX-2000/NCC-2000
USS Fearless NCC-14598
USS Frederickson NCC-42111
USS Gorkon NCC-40521
USS Grissom NCC-42857
USS Hood NCC-42296
USS Intrepid NCC-38907
USS Lakota NCC-42768 (refit)
USS Lexington NCC-14427
USS Livingston NCC-34099
USS Malinche NCC-38997
USS Melbourne NCC-62043
USS Okinawa NCC-13958
USS Potemkin NCC-18253
USS Repulse NCC-2544
USS Roosevelt NCC-2573
USS Tecumseh NCC-14934
USS Valley Forge NCC-43305

Your welcome.

WileyCoyote · « **Reply #543 on:** January 30, 2009, 11:27:12 PM »

I'll have to re-map the ship to allow for ID swapping, but it could be done.

Billz · « **Reply #544 on:** January 30, 2009, 11:29:59 PM »

Oh sorry. I've heard how much of a pain mapping is.

If you do that for the base ships, will you also do it for the refits?

WileyCoyote · « **Reply #545 on:** January 30, 2009, 11:35:44 PM »

The Excelsior you see here is the base ship for the refits. I haven't started on those, but there will be a new spacedock to contain them......

.

Billz · « **Reply #546 on:** January 30, 2009, 11:39:55 PM »

Quote from: WileyCoyote on January 30, 2009, 11:35:44 PM

The Excelsior you see here is the base ship for the refits. I haven't started on those, but there will be a new spacedock to contain them...... .

Urm, yeah. I've known that for years. Not a n00b anymore you know, lol.

WileyCoyote · « **Reply #547 on:** January 30, 2009, 11:46:38 PM »

Quote

Urm, yeah. I've known that for years. Not a n00b anymore you know, lol.

Once I re-map the ship, I will then start building the refit version. I'm new to ID swapping and it looks fairly easy. The Kelvin ships, and the new Enterprise are mapped this way. The new spacedock is 14k polys and will feature the ST3 interior. I've been dying to make one of these since I first started modding.

Rat Boy · « **Reply #548 on:** January 30, 2009, 11:54:43 PM »

First, sorry if I caused any trouble.

Second, I think a new spacedock is long overdue and Mr. Coyote (pronounced Ky-yo-tay like on Loony Tunes) is off to a good start.

WileyCoyote · « **Reply #549 on:** January 31, 2009, 12:00:03 AM »

Quote

First, sorry if I caused any trouble.
Second, I think a new spacedock is long overdue

No problem. It nice to know that I have a few fans. This starbase will be a great improvement compared to the older ones. It will make lots of people very happy. I just want to make sure for the other people on the forum that this thread is not a reference thread. It's just comments and critiques of my models.

Bigkap · « **Reply #550 on:** January 31, 2009, 08:48:14 AM »

Wiley, not sure about this as my eyes could be playing tricks on me, but in you're third picture above, the engineering section looks slightly too wide. Again if I'm mistaken, please correct me. Other than that, this ship is looking fantastic! Great work

Kirk · « **Reply #551 on:** January 31, 2009, 08:56:09 AM »

Your eyes aren't playing tricks on you, I thought the same thing.

WileyCoyote · « **Reply #552 on:** January 31, 2009, 09:43:10 AM »

Quote

the engineering section looks slightly too wide.

It might be a little wide. The engineering section was tricky to model. I used these schematics for the modeling.

http://www.ex-astris-scientia.org/scans/excelsior1.htm

Shadowknight1 · « **Reply #553 on:** January 31, 2009, 01:42:25 PM »

Good news on the Trek XI ships. Funny that they'll be flying around BC way before they fly around the big screen.

Excelsior looks fine to me, but then again I've never been a nitpicker when it comes to that ship.

And a new spacedock as well...about time someone did it. Good job so far Wiley.

ZERO · « **Reply #554 on:** January 31, 2009, 01:51:18 PM »

Its a good start on the space dock

Billz · « **Reply #555 on:** January 31, 2009, 03:31:30 PM »

Is the new spacedock intended as a full replacement for the stock game spacedock? If so, docking scripts are a pain to make.

Just letting you know if you had docking in mind.

StarTrekMike · « **Reply #556 on:** January 31, 2009, 05:23:56 PM »

Glad to hear that the XI ships are coming along well.

That Excelsior looks so amazing, really gives you the sense of how large that ship is compared to the ships of it's time.

I can't wait to try all your stuff out...I check this thread everyday for updates.

have the XI ships gone to beta yet?

Mike

FarShot · « **Reply #557 on:** January 31, 2009, 05:40:37 PM »

Quote from: StarTrekMike on January 31, 2009, 05:23:56 PM

I can't wait to try all your stuff out...I check this thread everyday for updates.

Ditto.

WileyCoyote · « **Reply #558 on:** January 31, 2009, 11:32:23 PM »

Here's a small sneek-peek at the interior of the spacedock showing off one of the runways.

gdata · « **Reply #559 on:** February 01, 2009, 03:11:07 AM »

Omg...are you working this fast, or is it just that you had these left on your HDD somewhere. cookie

News:

Author Topic: WileyCoyote's WIPs - Continues to Lurk Around (Read 588442 times)