Author Topic: Cinqnic WIP's 3d printer ship (Read 31521 times)

cinqnic · « **Reply #20 on:** February 26, 2010, 01:44:29 PM »

heres the ship with bigger engs
still got the bridge to do and the def dish and weapon points

Billz · « **Reply #21 on:** February 26, 2010, 02:33:30 PM »

U.S.S. Emmerich, Huntington Class

dEjavU · « **Reply #22 on:** February 26, 2010, 05:07:59 PM »

U.S.S. Rivendale NCC-1742 Sequoia class ;)

Great work so far cinqnic! Very original design, I like. I was wondering though if you thought about thinning out the naccelle pylons to a more stream lined shape? I think their a bit unnecesarily too widely flat from the top view. Those mesh parts though that you grabbed from DJ's ship are so perfect for this project of yours(matching textures and all)I really hope DJ let's you use them as that would simply put the cherry on top for this baby, he seems a bit lenient with his policy considering he allowed acid to port his Sun Tzu class to Legacy(maybe you'll have as much luck).

GMunoz · « **Reply #23 on:** February 26, 2010, 05:26:58 PM »

How about the U.S.S. Sultan

Shaping up nicley. The Nacelles do look a bit rigid on this design though.

King Class Scout · « **Reply #24 on:** February 26, 2010, 05:57:05 PM »

I still think "USS Australia", Commonwealth class. (that'll give anything with "commonwealth" a fair chance at Trek Posthumosity)

Edit: I asked my mum to take a look, and she called it a frog. so mabey USS Bufo?

Starforce2 · « **Reply #25 on:** February 27, 2010, 03:20:23 AM »

USS Croaker
USS Pacman

USS Budwiser :roll

cinqnic · « **Reply #26 on:** February 27, 2010, 05:17:38 AM »

The 1st ship design used all of DJ's stuff but this is now all my own work the colour might be the same has DJ's ship but thats as far as i would say, i have use all my own meshies/ models and textures, the design idea do come from DJ's great work just look at my Sarbe refit i think that that ship looks Like DJ's stuff just not as good as his work.
any way i hope people do like the ship.

Quote from: dEjavU on February 26, 2010, 05:07:59 PM

U.S.S. Rivendale NCC-1742 Sequoia class ;)

Great work so far cinqnic! Very original design, I like. I was wondering though if you thought about thinning out the naccelle pylons to a more stream lined shape? I think their a bit unnecesarily too widely flat from the top view. Those mesh parts though that you grabbed from DJ's ship are so perfect for this project of yours(matching textures and all)I really hope DJ let's you use them as that would simply put the cherry on top for this baby, he seems a bit lenient with his policy considering he allowed acid to port his Sun Tzu class to Legacy(maybe you'll have as much luck).

Quote from: GMunoz on February 26, 2010, 05:26:58 PM

How about the U.S.S. Sultan

Shaping up nicley. The Nacelles do look a bit rigid on this design though.

i am going to look at the eng because i not that happy with them my self

cinqnic · « **Reply #27 on:** February 27, 2010, 05:27:28 AM »

i forgot to add if anyone got design ideas for the engs please feel free tp post pic or tell me, but i am trying to make them look abit Azati-Prime future Enterprise

GMunoz · « **Reply #28 on:** February 27, 2010, 10:45:43 AM »

How about something like this?

Bones · « **Reply #29 on:** February 27, 2010, 12:38:42 PM »

err.. dunno , looks more like a baguette to me ;)

Kirk · « **Reply #30 on:** February 27, 2010, 12:41:54 PM »

I think I know what's really affecting the ship design. The connecting pylons are just too wide and it really is affecting the ship's silhouette. It just looks flat, fat, and awkward. If you shorten the engineering section, and make the pylons less wide, then the ship might start shaping up more. Right now it looks like it's entering warp.

Bones · « **Reply #31 on:** February 27, 2010, 01:09:18 PM »

Quote from: Kirk on February 27, 2010, 12:41:54 PM

I think I know what's really affecting the ship design. The connecting pylons are just too wide and it really is affecting the ship's silhouette. It just looks flat, fat, and awkward. If you shorten the engineering section, and make the pylons less wide, then the ship might start shaping up more. Right now it looks like it's entering warp.

yeah that's a thought, just leave old nacelles and saucer as they are ;)

GMunoz · « **Reply #32 on:** February 27, 2010, 02:52:49 PM »

Give the ship a French name and it will all come together.

Dalek · « **Reply #33 on:** February 27, 2010, 03:02:38 PM »

U.S.S. Marseilles, Ypres class? Yeah, French fits.

cinqnic · « **Reply #34 on:** February 28, 2010, 03:23:17 PM »

here i little refit of the ship the ship on the left is the new design

dEjavU · « **Reply #35 on:** February 28, 2010, 03:56:26 PM »

Nice! Looks much much better. ;)

Kirk · « **Reply #36 on:** February 28, 2010, 04:34:57 PM »

Indeed, the ship is looking much better. Any chance we can see some more views?

Bones · « **Reply #37 on:** March 01, 2010, 05:29:02 AM »

Yeah but I have an idea ;) while I like the one to the left more I still like the old one so any chance to have both ships in one pack as a form of NX and NCC version ?

cinqnic · « **Reply #38 on:** March 01, 2010, 12:19:15 PM »

heres more screen shot but now i not happy with the bridge area so more work to be done in that area

Lionus · « **Reply #39 on:** March 01, 2010, 02:29:06 PM »

Quote from: Dalek on February 27, 2010, 03:02:38 PM

U.S.S. Marseilles, Ypres class? Yeah, French fits.

Does that come with white flag and victory parade for the opponents?

News:

Author Topic: Cinqnic WIP's 3d printer ship (Read 31521 times)