Author Topic: Cinqnic WIP's 3d printer ship (Read 31506 times)

cinqnic · « **on:** February 18, 2010, 03:48:36 PM »

right here is a ship throw together in a few hours, i have use parts from DJ Curtis original Vivace class but if he does not let me use parts i will rework it, but this is roughly how the ship will look, if people like it then i will put alot more work into it, after the falmouth design is finished, any people let me know whats what ??.......................................

!!!!!! UPDATE!!!!
i am now reworking it with all my own parts so dont worry Dj Curtis i was only using the the pictures of the model to show how the ship might look

Dalek · « **Reply #1 on:** February 18, 2010, 03:50:33 PM »

It kinda looks like a mix between the Raptor and a fish.

And I don't think DJ will allow its release. It's been his policy since '09.

bankruptstudios · « **Reply #2 on:** February 18, 2010, 04:36:06 PM »

It's kind of cool, but its kind of rude to post befor permission is given. That being said, i would like to see more of this design.

cinqnic · « **Reply #3 on:** February 18, 2010, 05:05:07 PM »

i posted this due to let people know what the ship would look like and i have sent a message to DJ to ask him if i can use parts of his ship on this design but if he comes back and says no i can re work it and build my own its just that his ships are the dogs $%**$%, but this is a plan of the ship and i will rework it to the same design but use new parts.

Starforce2 · « **Reply #4 on:** February 18, 2010, 06:09:19 PM »

that rocks. Needs phaserbanks though. Hope he allows it.

cinqnic · « **Reply #5 on:** February 19, 2010, 07:41:00 AM »

heres the model with out DJ Hard work, so if he comes back as no i will build my own, ps i have already started on my own eng's and textures

GMunoz · « **Reply #6 on:** February 19, 2010, 10:23:58 AM »

Very cool. super advanced design

King Class Scout · « **Reply #7 on:** February 19, 2010, 01:31:21 PM »

the name that comes to mind is "USS Australia"...

Shadowknight1 · « **Reply #8 on:** February 19, 2010, 06:09:20 PM »

I hate to say it, but you might as well get started on building your own, DJ generally doesn't allow any of his stuff to be used by anyone else.

cinqnic · « **Reply #9 on:** February 20, 2010, 05:17:03 PM »

I need some one to pass on a message to DJ Curtis so if any Admiral/BCFiles Staff/ staff can let me know if they can email my meassage on to him due to his email address being hidden, please let me known,

Aeries · « **Reply #10 on:** February 20, 2010, 05:48:55 PM »

generally DJ doesn't allow modifications or kitbashes of his work. If you PM him, and *wait* for him to respond, he'll get back to you when he's able. Otherwise, it's disrespectful to the artist to use his/her work without prior consent, regardless of the circumstances. I also suggest reading the "readme" file for terms of use. Last I checked, DJCurtis noted in there that he does not allow his work to be modified and particularly, not redistributed.

cinqnic · « **Reply #11 on:** February 21, 2010, 02:24:16 PM »

here is the ship so far it now has all my own parts on it (including texture) all DJ stuff has gone but if you seen the picture of the design before i took them off, this is how the ship is going to look but with all my own work, so far so good

JamesTiberiusKirk · « **Reply #12 on:** February 22, 2010, 08:23:21 AM »

could it be that you are pretty fast?

nice work!

cinqnic · « **Reply #13 on:** February 22, 2010, 10:52:10 AM »

Quote from: JamesTiberiusKirk on February 22, 2010, 08:23:21 AM

could it be that you are pretty fast?

nice work!

Ive got too much time on my hands

cinqnicbc · « **Reply #14 on:** February 24, 2010, 05:35:27 AM »

hi people right i ve had to sent up a new account due to my old having problems,
i have rework all the ship with my OWN models and textures,
the ship will be MVAM ie if you see from the pictures the saucer section will have it own warp engs they are place under the grey grill on the sacuer and do raise up when in MVAM, i am working on the engs now, and then will start on the weapon points i am real happy with the texture that ive done the best ive done so far,
any way feed back would be very greatful

FOR STAFF MEMBERS

I ve had problems getting on the the bc forms when i log in as cinqnic I cant see the bc forms post but when i come in as a guest i can so i dont know if my old account has been hijack or HAS IT been limited by a staff member if it has been limited by a staff member please could you let me know WHY !

Bones · « **Reply #15 on:** February 24, 2010, 06:33:24 AM »

Nah I doubt it, unless you broke some rules but it's unlikely, you would get warning first ;)

the aft of your ship reminds me of D'deridex and overall design looks like that Azati-Prime future Enterprise, cool ;)

cinqnic · « **Reply #16 on:** February 26, 2010, 12:35:50 PM »

HERE the ship with eng's

Dalek · « **Reply #17 on:** February 26, 2010, 12:38:32 PM »

I'd make the warp engines a lot bigger.

cinqnic · « **Reply #18 on:** February 26, 2010, 12:39:05 PM »

soz that last picture is an old pic so please dont that no notice of it
it should of been this picture

Dalek · « **Reply #19 on:** February 26, 2010, 12:42:16 PM »

They still look far too small.

News:

Author Topic: Cinqnic WIP's 3d printer ship (Read 31506 times)