Author Topic: Stripper connie TNG (Read 4370 times)

King Class Scout · « **on:** January 21, 2011, 03:45:15 PM »

guess who's actually playing with max, for once!

I took an Open Source connie, stripped the frou-frou off, and now want to add a few elements back in. i'm contemplating replacing the pylons, but the basic shell of a TOS connie is still there.

i intend to redeco as TNG or up.

Vedic · « **Reply #1 on:** January 21, 2011, 04:21:58 PM »

Good luck, And must of all have Fun.

Captain_D · « **Reply #2 on:** January 21, 2011, 07:10:37 PM »

Looks like you have a good starting point created.

DJ Curtis is the only other modder I've seen recently take the Connie to TNG level. though he left the basic hull design and layout intact. Be interesting to see what you change on her.

I second what Vedic said,,

King Class Scout · « **Reply #3 on:** January 22, 2011, 08:55:42 AM »

at this point, since I'm a total NOOB, I'm tempted to leave all as is now, and simply slap paint goodies on. however, the least I think I'm gonna do is give the thing a torp launcher module, rather than have it fire torps from the underside dome foreward face.

wish me luck adding stuff and getting it right, peeps.

Centurus · « **Reply #4 on:** January 22, 2011, 02:51:44 PM »

Just make changes where you feel they should be made and what you feel looks right. It's all a matter of personal preference.

Starforce2 · « **Reply #5 on:** January 22, 2011, 03:49:22 PM »

Quote from: King Class Scout on January 22, 2011, 08:55:42 AM

at this point, since I'm a total NOOB, I'm tempted to leave all as is now, and simply slap paint goodies on. however, the least I think I'm gonna do is give the thing a torp launcher module, rather than have it fire torps from the underside dome foreward face.

wish me luck adding stuff and getting it right, peeps.

I did pm you some items you might find usefull for tng-ifing a connie.

DMWalsh79 · « **Reply #6 on:** January 22, 2011, 04:46:35 PM »

Oh man you should take a look at Deg 3d's Connie for a reference!

King Class Scout · « **Reply #7 on:** January 22, 2011, 05:22:20 PM »

I've finished up with the model itself. other than some minor tweaks, it's now onto the interesting part of getting textures on it.

with the preliminay textures on it...now I have to wait to have someone check and see if I did this right, or I have to create UV's all over again

King Class Scout · « **Reply #8 on:** January 29, 2011, 03:41:00 PM »

thought you guys deserved a peek before BC gets stuffed into a Mayflower van for a while

I'm actually heading somewhere with textures, with big thanks to Baz for a LOT of help.

Phoenix Bondi · « **Reply #9 on:** February 28, 2011, 02:21:31 PM »

Looking forward to this mate good on ya!

King Class Scout · « **Reply #10 on:** February 28, 2011, 06:00:25 PM »

glad I prodded ya.

the original model was Stresspuppy's take on the connie, and kinda rough around the edges due to limitations of the time. I stripped off the tack on nav lights, and the "grab handles" and the warp balls on the nacelles. the lights and warp balls would have needed redone, anyway. other than thickening the neck and widening the Nacelle pylons, that's the only real alterations.

i did screw up on the Impulse deck, however, so I improvised.

i think I better redo the nacelles themselves, though. i got the registry numbers a bit too big

Phoenix Bondi · « **Reply #11 on:** February 28, 2011, 06:18:48 PM »

Well if you want a connie you could always ask me for mine Naked or with my textures i might say no but then again maybe i wont :p

lol

DMWalsh79 · « **Reply #12 on:** February 28, 2011, 06:25:18 PM »

To be honest kind of surprised you didn't go for a Daed King....

King Class Scout · « **Reply #13 on:** March 01, 2011, 08:38:21 AM »

Quote from: DMWalsh79 on February 28, 2011, 06:25:18 PM

To be honest kind of surprised you didn't go for a Daed King....

I'm working on that

i actually have an idea for a PDW take on a dade that's more a nod to the configuration (there's no "round head" on it), but I can't model for crap

i'm more in the "chip foose" department.

DMWalsh79 · « **Reply #14 on:** March 01, 2011, 07:36:08 PM »

okay now you have my attention... Sounds very interesting! :drool:

King Class Scout · « **Reply #15 on:** March 19, 2011, 03:24:02 PM »

dug up my tablet and actually did some work on the TNG connie today. it's not perfect, and still needs tweaks, but tell me what you think (and see if you can spot the joke)

Edit: D'OH!

WileyCoyote · « **Reply #16 on:** March 19, 2011, 03:29:48 PM »

Quote

Edit: D'OH!

Simpsons joke when Carl uses a calendar- mixes up the word Concur(to agree with) when on the calendar it says conquer(to take over).

Is the neck of the ship connected with the saucer?

King Class Scout · « **Reply #17 on:** March 19, 2011, 03:33:19 PM »

nope, but nice tie-in. i went D'Oh when I forgot to add the pics *facepalm*

hint: ship's registry.

FarShot · « **Reply #18 on:** March 19, 2011, 07:10:53 PM »

Zip code where you live?

Nihilus · « **Reply #19 on:** March 19, 2011, 07:36:25 PM »

Quote from: FarShot on March 19, 2011, 07:10:53 PM

Zip code where you live?

Pebble Beach, CA?

News:

Author Topic: Stripper connie TNG (Read 4370 times)