« previous next »
Pages: [1] 2 3   Go Down

Author Topic: TMP Shuttle & Warp Sled WIP (Another version coming!... Again!)  (Read 9560 times)

Offline Villain

  • Posts: 1480
  • Cookies: 71
  • The artist formerly known as Prime
TMP Shuttle & Warp Sled WIP (Another version coming!... Again!)
« on: July 01, 2008, 08:05:16 AM »
Well, I finally did enough to show some progress. As soon as I've added the equipment on the top, I'll get started on the Warp Sled. Not sure about the interchangable pods as I've only seen them side on. I will however need somebody to contact me regarding textures, so either through this thread or through PM so we can discuss how to transfer the file.

So until the next update this friday, enjoy.

Compliments and criticism are more than welcome and requested, as usual.
Logged


"The design is clearly ancient... Launched hundreds of thousands of years ago."

Quote from: JimmyB76
der-ner-ner-ner-ner ..... der-ner-ner-ner-ner .....
---
Quote from: Rick Sternbach, on the topic of the Galor Class' length
...Probably not, but the number I get(379.6m) could be considered ?original intent,? a term that I think I will be using from now on, and ?canon? be damned.

Offline lint

  • Posts: 599
  • Cookies: 211
Re: TMP Shuttle & Warp Sled WIP
« Reply #1 on: July 01, 2008, 08:06:27 AM »
Looking good so far, neighbor :D
Logged

Offline Villain

  • Posts: 1480
  • Cookies: 71
  • The artist formerly known as Prime
Re: TMP Shuttle & Warp Sled WIP
« Reply #2 on: July 01, 2008, 08:13:12 AM »
Yeah, finally found Boolean Combine, haha. Works wonders, and that only took me under an hour. But with the SUPERSECRETPROJECT I'm working on, that hour was as much as I could work on it. :v: If this turns out well, the other Trek project will look fantastic.
Logged


"The design is clearly ancient... Launched hundreds of thousands of years ago."

Quote from: JimmyB76
der-ner-ner-ner-ner ..... der-ner-ner-ner-ner .....
---
Quote from: Rick Sternbach, on the topic of the Galor Class' length
...Probably not, but the number I get(379.6m) could be considered ?original intent,? a term that I think I will be using from now on, and ?canon? be damned.

Offline tiqhud

  • BCFiles File Poster
  • Posts: 1763
  • Cookies: 1067
  • San Francisco Shipyards (HPer) file manuiplater
Re: TMP Shuttle & Warp Sled WIP
« Reply #3 on: July 01, 2008, 08:22:31 AM »
very nice , BC needed the Warp sled \ shuttle.
Logged
TiqHud
you sir, are unable to strike, the port or starboard parts of hull , of a bovine storage facility.
Canon , what people argue exists, that doesn't really  exist.
It is all the little details, that cause headaches.
"Never judge wealth with Money"
'Intelligence has Nothing to do with Politics'
it is Late, Do you know where your Towel is?

Offline WileyCoyote

  • The Other Ship Builder
  • Posts: 2347
  • Cookies: 1222
  • Awesome-sauce factory owner
Re: TMP Shuttle & Warp Sled WIP
« Reply #4 on: July 01, 2008, 08:58:34 AM »
It looks nice.  One question that comes to mind is that-- will it be MVAM compatible?
Logged
Please visit my Deviantart page at www.trekmodeler.deviantart.com.

My website is up! Download my ships here: http://www.michaelwileyart.com

Offline genty

  • Posts: 148
  • Cookies: 19
Re: TMP Shuttle & Warp Sled WIP
« Reply #5 on: July 01, 2008, 09:56:08 AM »
Heres some references you might be interested in
http://probertdesigns.com/Folder_DESIGN/LR_Shuttle-2.html
Logged

Offline Aeries

  • Posts: 1446
  • Cookies: 226
Re: TMP Shuttle & Warp Sled WIP
« Reply #6 on: July 01, 2008, 09:59:50 AM »
ABOUT BLOODY TIME! Looking great there, Prime! :D Don't forget the sled attachment, too!! :D
Logged

Offline Villain

  • Posts: 1480
  • Cookies: 71
  • The artist formerly known as Prime
Re: TMP Shuttle & Warp Sled WIP
« Reply #7 on: July 01, 2008, 10:06:30 AM »
Quote from: tiqhud on July 01, 2008, 08:22:31 AM
very nice , BC needed the Warp sled \ shuttle.

And who better to bring it in than the new guy?

Quote from: WileyCoyote on July 01, 2008, 08:58:34 AM
It looks nice.  One question that comes to mind is that-- will it be MVAM compatible?

Yes, it will be MVAM compatible, as suggested in the Jenolan thread (Another TMP project I've got running alongside this)

Quote from: genty on July 01, 2008, 09:56:08 AM
Heres some references you might be interested in
http://probertdesigns.com/Folder_DESIGN/LR_Shuttle-2.html

Thank you, but I have enough reference pictures, though those would be good for whoever wishes to texture it. ;)

Quote from: Aeries on July 01, 2008, 09:59:50 AM
ABOUT BLOODY TIME! Looking great there, Prime! :D Don't forget the sled attachment, too!! :D

Don't worry mate, I wouldn't dream of adding a non-warp capable ship. :v:
Logged


"The design is clearly ancient... Launched hundreds of thousands of years ago."

Quote from: JimmyB76
der-ner-ner-ner-ner ..... der-ner-ner-ner-ner .....
---
Quote from: Rick Sternbach, on the topic of the Galor Class' length
...Probably not, but the number I get(379.6m) could be considered ?original intent,? a term that I think I will be using from now on, and ?canon? be damned.

Offline Aeries

  • Posts: 1446
  • Cookies: 226
Re: TMP Shuttle & Warp Sled WIP
« Reply #8 on: July 01, 2008, 10:18:42 AM »
Quote from: USS Prime on July 01, 2008, 10:06:30 AM
And who better to bring it in than the new guy?

EXACTLY!!! That's what I say!

Best luck, Prime!

Quote from: USS Prime on July 01, 2008, 10:06:30 AM
Don't worry mate, I wouldn't dream of adding a non-warp capable ship. :v:

Good. Now, back to work with ya! I want updates by the time I get off work this afternoon, darnit! [haha, just kidding dude. Don't rush the art. :D]

Again, best luck!
Logged

Offline Villain

  • Posts: 1480
  • Cookies: 71
  • The artist formerly known as Prime
Re: TMP Shuttle & Warp Sled WIP
« Reply #9 on: July 01, 2008, 10:23:04 AM »
Lol, you know, with something I just discovered, it may be ready for texturing by tomorrow night. Damned modelling, why must it be so addictive?
Logged


"The design is clearly ancient... Launched hundreds of thousands of years ago."

Quote from: JimmyB76
der-ner-ner-ner-ner ..... der-ner-ner-ner-ner .....
---
Quote from: Rick Sternbach, on the topic of the Galor Class' length
...Probably not, but the number I get(379.6m) could be considered ?original intent,? a term that I think I will be using from now on, and ?canon? be damned.

Offline dlanoDcM

  • Lazy bum (aka student)
  • Posts: 31
  • Cookies: 1
  • "Which button fires the phasers again?"
Re: TMP Shuttle & Warp Sled WIP
« Reply #10 on: July 01, 2008, 11:44:45 AM »
Thats good to hear, is anyone lined up for texturing at all?
Logged
Plowing my way through the modding tutorials of the great internets :D

Offline baz1701

  • Posts: 3392
  • Cookies: 1434
Re: TMP Shuttle & Warp Sled WIP
« Reply #11 on: July 01, 2008, 11:45:07 AM »
Most excellent, makes me glad now I've drop the piece of c@&p shuttle I started for my hanger deck.
Logged
Whatever knocks us back, can only make us stronger.

Offline Villain

  • Posts: 1480
  • Cookies: 71
  • The artist formerly known as Prime
Re: TMP Shuttle & Warp Sled WIP
« Reply #12 on: July 01, 2008, 12:16:49 PM »
Quote from: baz1701 on July 01, 2008, 11:45:07 AM
Most excellent, makes me glad now I've drop the piece of c@&p shuttle I started for my hanger deck.

You're quite welcome to take the model once it's all done up Baz, after seeing your work, I'd be honoured to see anything of mine alongside yours, if that's what you're implying.

As for the textures, not yet.
Logged


"The design is clearly ancient... Launched hundreds of thousands of years ago."

Quote from: JimmyB76
der-ner-ner-ner-ner ..... der-ner-ner-ner-ner .....
---
Quote from: Rick Sternbach, on the topic of the Galor Class' length
...Probably not, but the number I get(379.6m) could be considered ?original intent,? a term that I think I will be using from now on, and ?canon? be damned.

Offline Aeries

  • Posts: 1446
  • Cookies: 226
Re: TMP Shuttle & Warp Sled WIP
« Reply #13 on: July 01, 2008, 10:00:23 PM »
I'm stoked. can't wait to see this to completion. :]
Logged

Offline baz1701

  • Posts: 3392
  • Cookies: 1434
Re: TMP Shuttle & Warp Sled WIP
« Reply #14 on: July 02, 2008, 04:17:59 AM »
I'll look forward to parking a couple in my hanger.

Side note: could my hanger be used as a spacedock replacement so we could see the shuttle dock in the game?
Logged
Whatever knocks us back, can only make us stronger.

Offline Villain

  • Posts: 1480
  • Cookies: 71
  • The artist formerly known as Prime
Re: TMP Shuttle & Warp Sled WIP
« Reply #15 on: July 02, 2008, 07:42:11 AM »
Quote from: baz1701 on July 02, 2008, 04:17:59 AM
I'll look forward to parking a couple in my hanger.

Side note: could my hanger be used as a spacedock replacement so we could see the shuttle dock in the game?

If you set it as part of the ship model and have that ship as a Starbase, I'm sure it could be worked out.
Logged


"The design is clearly ancient... Launched hundreds of thousands of years ago."

Quote from: JimmyB76
der-ner-ner-ner-ner ..... der-ner-ner-ner-ner .....
---
Quote from: Rick Sternbach, on the topic of the Galor Class' length
...Probably not, but the number I get(379.6m) could be considered ?original intent,? a term that I think I will be using from now on, and ?canon? be damned.

**M23**

  • Guest
Re: TMP Shuttle & Warp Sled WIP
« Reply #16 on: July 02, 2008, 12:11:15 PM »
great start m8.
Logged

Offline Kirk

  • Posts: 1438
  • Cookies: 139
    • My Released Mods
Re: TMP Shuttle & Warp Sled WIP
« Reply #17 on: July 02, 2008, 12:12:14 PM »
Oooh! Oooh! Very off-topic, but I you made a connie with MVAM for bay doors open and bay doors shut, you could make it so that you launch shuttles only when the doors are open, from the shuttle bay. *Dies from excitement*

Oh, by the way Prime your models look very nice and smooth, I'm jealous.
Logged

Offline Villain

  • Posts: 1480
  • Cookies: 71
  • The artist formerly known as Prime
Re: TMP Shuttle & Warp Sled WIP
« Reply #18 on: July 03, 2008, 09:35:48 AM »
Thanks for the comments, guys. Just got back from watching Hancock (OH, MY, GOD) so I'm taking a night off modelling to rave about the movie to friends all night (Watch out Kirk, I'm coming for you. ;D)

Quote from: kirk2164 on July 02, 2008, 12:12:14 PM
Oooh! Oooh! Very off-topic, but I you made a connie with MVAM for bay doors open and bay doors shut, you could make it so that you launch shuttles only when the doors are open, from the shuttle bay. *Dies from excitement*

Oh, by the way Prime your models look very nice and smooth, I'm jealous.

That'd be a good idea, actually, The Open Doors model could feature the hangar model inside, and the shuttle could sit snugly (She WILL be canon-ily sized) inside.

That model was looking nice, until I came upon a very, very big problem. I started from scratch, shuttle model is 80% complete model-wise, Atai-class Warp Sled is yet to be built. The new one looks MUCH better, I promise.
Logged


"The design is clearly ancient... Launched hundreds of thousands of years ago."

Quote from: JimmyB76
der-ner-ner-ner-ner ..... der-ner-ner-ner-ner .....
---
Quote from: Rick Sternbach, on the topic of the Galor Class' length
...Probably not, but the number I get(379.6m) could be considered ?original intent,? a term that I think I will be using from now on, and ?canon? be damned.

Offline baz1701

  • Posts: 3392
  • Cookies: 1434
Re: TMP Shuttle & Warp Sled WIP
« Reply #19 on: July 03, 2008, 09:48:52 AM »
If by the hanger your refering to mine it will be release by the end of the weekend for download.

Just have to add the shuttle control room and so issue with the fantail door to resolve
Logged
Whatever knocks us back, can only make us stronger.
Pages: [1] 2 3   Go Up
« previous next »