Author Topic: Vger Spacecraft (Read 15076 times)

tiqhud · « **Reply #60 on:** March 27, 2009, 08:07:18 AM »

Boy this looks great, baz, some friendly advice, Fix it the way You want, you can not Please everyone, no matter what you do some1 will always find fault, besides this is Your ship.

Atlantis27 · « **Reply #61 on:** March 27, 2009, 10:12:28 PM »

Quote from: baz1701 on March 27, 2009, 05:12:22 AM

Right here is a question that is bugging me.

Which way is forward?

The Enterprise you assume is approuching the most direct root from Earth so when the cloud clears you see the big yellow tube. But in the directors cut the CGI V'ger is shown flying the yellow tube at the rear?

Is this the way it flys? I prefer the pre-directors cut notion of the yellow tube being forward.

Your thoughts?

But in both versions, before the cloud clears, the Enterprise does its flyby along the top of V'Ger, towards the "yellow tube", so if the Enterprise was coming in from the shortest route, either way the "yellow tube" is at the rear.

This is looking really good, keep it up! =)

baz1701 · « **Reply #62 on:** March 30, 2009, 03:41:16 AM »

Quote from: Atlantis27 on March 27, 2009, 10:12:28 PM

the Enterprise does its flyby along the top of V'Ger, towards the "yellow tube", so if the Enterprise was coming in from the shortest route, either way the "yellow tube" is at the rear.

The Enterprise flys away from the yellow end with the ball as it is the first thing you see as Enterprise clears the cloud. V'ger's cloud is over 82 AU's (The Earth is 1.00 ? 0.02 AU from the Sun.) in diameter why would Enterprise waste time flying around back to enter the cloud.

I just thing that maybe the directors cut boys have it reversing into Earth orbit?

mckinneyc · « **Reply #63 on:** March 30, 2009, 06:12:26 AM »

Also they edited the size of the could to 2AUs I believe.

Anyway baz V'ger looks fabulous. One question, is the entrance and chamber scaled to the Connie or can you fly a Galaxy into it?

baz1701 · « **Reply #64 on:** March 30, 2009, 06:20:14 AM »

Judging from the film footage you'll gould fly a SSD in there and still have room either side!

WillDecker · « **Reply #65 on:** March 30, 2009, 11:54:14 PM »

The Director's cut does say 2AU because 82AU covers most of the solar system, from what they said.

baz1701 · « **Reply #66 on:** March 31, 2009, 08:03:25 AM »

Right after some great ref's from Will Decker I have started again.

tiqhud · « **Reply #67 on:** March 31, 2009, 08:11:54 AM »

it would kind'a be nice to fly a ship into and Look t stuff, it will also test your flying skill.

MarkyD · « **Reply #68 on:** March 31, 2009, 03:18:09 PM »

Quote from: tiqhud on March 31, 2009, 08:11:54 AM

it would kind'a be nice to fly a ship into and Look t stuff, it will also test your flying skill.

Look back a few pages

Baz nice revision mate, looks great 8)

baz1701 · « **Reply #69 on:** March 31, 2009, 05:05:27 PM »

I've combined the new aft section with the front of the original model

MarkyD · « **Reply #70 on:** March 31, 2009, 05:09:12 PM »

Quote from: baz1701 on March 31, 2009, 05:05:27 PM

I've combined the new aft section with the front of the original model

Unless those verts line up 100% im assuming the model is getting messy mate, looks good in the render, but what does the wire look like mate???

baz1701 · « **Reply #71 on:** March 31, 2009, 05:13:38 PM »

take a look

FourChan · « **Reply #72 on:** March 31, 2009, 05:17:52 PM »

Spiffy and nice model.

MarkyD · « **Reply #73 on:** March 31, 2009, 05:57:55 PM »

Its a separate object? how many parts does this model consist of? or is this a BC thing.. I am working on ONE unified mesh one object, bc allows for multiple objects to be attached and considered one?? :?

vonfrank · « **Reply #74 on:** March 31, 2009, 07:01:54 PM »

now that looks NICE!! 8)
i don't see any proportion faults with it at all

now all it needs is a bit more detail and some realistic textures :lol:

baz1701 · « **Reply #75 on:** April 01, 2009, 03:53:38 AM »

At the moment it is about 30 seperate piece, though like my Enterprise I will attach and collapse it to a single mesh. I have already since the version 1 of the model in the game (see page 2) so it converted ok.

Next will be adding some surface and interior detail prior to proper unwraping.

baz1701 · « **Reply #76 on:** April 02, 2009, 05:34:53 PM »

just asmall update

angryandorian · « **Reply #77 on:** April 02, 2009, 05:39:17 PM »

Nice Work, it's really starting to look good.

Billz · « **Reply #78 on:** April 02, 2009, 06:46:04 PM »

:shock:

Awesome.

FourChan · « **Reply #79 on:** April 02, 2009, 07:25:06 PM »

Nice, I wanna fly into it now with the Enterprise lol.

News:

Author Topic: Vger Spacecraft (Read 15076 times)