Author Topic: Shino's bridge works (Read 24116 times)

Kirk · « **Reply #100 on:** July 03, 2009, 05:35:27 PM »

There are quite a few design flaws that I see with this bridge. (Not an attack on you, just something that just makes it look unbelievable.)

Those head-rests still need to become head-rests and not neck-rests.
What Dalek pointed out about the turbolift is a good point. If you step out and head right, you'll probably stuble and fall because of the small drop off. Adding and gentle slope from the lift edge, flowing into the floor would work out nicely to solve this issue.
The side consoles on the command staff level are just in a plain awkward position. In the event of a sudden stop, the operator is going to fall down a flight of rather steep stairs. Also, they are too low to be operated from the standing position. (They are the same height as the center, sitting position, directly in front of the captain.)
The first set of stairs leading down to the command level shouldn't really slope down. I realize it's to match the design of the ramp, but that's really going to mess up one's balance as they ascend/ descend those stairs. (Though the railing does help. ;))

Keep in mind, I like the overall design, but my mind can't help but pick up on things that just wouldn't sit well with me if I were there.

Shino Tenshi · « **Reply #101 on:** July 03, 2009, 06:32:46 PM »

I may change that turbolift issue and I will change the height of those consoles.
But the rest won't change... Omi is kinda special when it comes to altering his design. =/

-Edit: I heightened the consoles and the back-rests (those neck-rests should now actually be head-rests).
I also started texturing the floor:
(ignore the unmapped spots -.-)

Nebula · « **Reply #102 on:** July 03, 2009, 06:36:52 PM »

oooh that looks cool

CJLarkin · « **Reply #103 on:** July 03, 2009, 06:39:56 PM »

Fantastic!

kitkat27 · « **Reply #104 on:** July 03, 2009, 06:47:03 PM »

Thats AWESOME!

~Is the captains chair the middle console or did omi give u permission to make it the middle chair (making sense)??

Shino Tenshi · « **Reply #105 on:** July 04, 2009, 09:24:39 AM »

middle console.

-Edit: Progress! (chairs not completely done, yet.)
-Edit 2: Added original for comparison.

Aeries · « **Reply #106 on:** July 04, 2009, 03:08:44 PM »

Now that's hot. ;)

Shino Tenshi · « **Reply #107 on:** July 05, 2009, 12:15:07 PM »

Update!

To do:
-finish the roof (the two blueish textures are "dummies")
-finish the chairs
-turbolift
-displays

lint · « **Reply #108 on:** July 05, 2009, 01:09:43 PM »

wow,
I rarely check the Bridge modding section, But very nice.

JimmyB76 · « **Reply #109 on:** July 05, 2009, 02:07:03 PM »

my only thought is that whoever is sitting in that middle console will completely block the captain's view of the viewscreen...
i dunno, to me that station is in the way, IMO i think the bridge would be better off without it right there...

Aeries · « **Reply #110 on:** July 05, 2009, 02:46:13 PM »

Quote from: JimmyB76 on July 05, 2009, 02:07:03 PM

my only thought is that whoever is sitting in that middle console will completely block the captain's view of the viewscreen...

Actually, hun, it was stated earlier that that's where the captain, himself, sits.

Shino Tenshi · « **Reply #111 on:** July 05, 2009, 04:03:39 PM »

Yep, taht's the CO's seat.

Update.

To do:
-displays
-finish the roof (center-sphere [window] done but that dark-blue on the outer rim still bothers me...)
-maybe add some kind of "pattern" to the turbolift's walls

Billz · « **Reply #112 on:** July 05, 2009, 04:16:36 PM »

I'm not sure about those consoles on either side of the captains chair. It looks like it would be very awkward standing at those consoles if you leave them inverted towards the captains chair like that. Otherwise, very cool.

Shino Tenshi · « **Reply #113 on:** July 06, 2009, 11:10:52 AM »

Small update:
-turbolift walls done
-plaque added
-roof dome done

to do:
-displays
-finish the roof

Shino Tenshi · « **Reply #114 on:** July 08, 2009, 12:31:17 PM »

Started working on the LCARS.

First w.i.p. shot of the very first MSD I've ever created:

tiqhud · « **Reply #115 on:** July 08, 2009, 01:53:13 PM »

looks very good, I think you should get a cookie

Billz · « **Reply #116 on:** July 08, 2009, 02:25:50 PM »

Will a Omega class image fit in that MSD though?

Infact, what the heck does an Omega class look like?

Shino Tenshi · « **Reply #117 on:** July 08, 2009, 04:56:10 PM »

You'll see soon enough

I'll tell you this much: She's one hell of a strange ship ;)

-Edit: There you go, another WIP shot:

Dalek · « **Reply #118 on:** July 08, 2009, 05:02:35 PM »

Yeah...its a box with a warp engine on the inside. And those bussard collectors will be a bit useless on the inside.

Jb06 · « **Reply #119 on:** July 08, 2009, 05:03:11 PM »

Quote from: Shino Tenshi on July 08, 2009, 04:56:10 PM

You'll see soon enough
I'll tell you this much: She's one hell of a strange ship ;)

-Edit: There you go, another WIP shot:

Looks great! All I suggest is put your name across it when posting LCARs... people have a tendency of nicking them ;)

Otherwise awesome ;)

~Jb06

News:

Author Topic: Shino's bridge works (Read 24116 times)