Author Topic: Cinqnic WIP's 3d printer ship (Read 75928 times)

dEjavU · « **Reply #320 on:** September 23, 2010, 01:54:16 AM »

Definitely 1, maybe you can use the 2 to house the warp grills. ;)

cinqnic · « **Reply #321 on:** September 27, 2010, 01:30:16 PM »

hi just to let people know i have the venture refit ready for bc filefront and the adder has been sent off to be hardpointed

cinqnic · « **Reply #322 on:** October 06, 2010, 04:30:45 PM »

HI there
just an update the new jj venture has been sent to bc filefront and should be avible to down load soon

JamesTiberiusKirk · « **Reply #323 on:** October 07, 2010, 11:31:13 AM »

cant wait !

cinqnic · « **Reply #324 on:** October 07, 2010, 03:01:08 PM »

The ships is available heres the link
http://bridgecommander.filefront.com/file/_Venture_class_Vessel_USS_Affirmation;117079

JimmyB76 · « **Reply #325 on:** October 07, 2010, 03:05:56 PM »

can you please create a thread for it in BC Downloads forum for easier reference later?
thx

Hellsgate · « **Reply #326 on:** October 07, 2010, 04:39:59 PM »

I'd leave the warp field governor inside the saucer, toward the aft and replace it with an underslung tactical module a-la the Phobos or U.S.S. Reliant as it seems appropriate for the Romulan War era. Add smaller impulse engines in the edge of the catamarans/saucer hull. Leave smaller shuttlepod bays or cargo bays in the ends of the catamarans where the impulse engines once were.

cinqnic · « **Reply #327 on:** October 15, 2010, 01:29:27 PM »

Here a update i started working on a refit on the uss affirmation, from what people have left ie to quote from kent a bc filefront member

ok this is a beautiful ship. my ONLY issue, my ONLY impassible issue is that weird, wide area where on say the Enterprise-E would be the shuttle bay. The vertical detailing which seems to speek towards right and left opening doors of a bay of some sort, just don't make sense. I personally feel, to give this ship an added dose of amazing, to maybe do more detailing around the cowling of that structure. A shuttle bay, some torpedo tubes, maybe more docking bays or work bee launching doors would just be so nice on an already beautiful ship.

That large uniform pattern just seems like an after thought. and it doesn't do the model any justice already, and that is a grave injustice.

Lionus · « **Reply #328 on:** October 15, 2010, 02:18:47 PM »

There's also one issue with that area in the published version: that door/hatch/opening remains lighted as if in direct light even when it's in the shadow side of the ship. possible alpha-channel issue?

cinqnic · « **Reply #329 on:** October 15, 2010, 02:42:32 PM »

Quote from: Lionus on October 15, 2010, 02:18:47 PM

There's also one issue with that area in the published version: that door/hatch/opening remains lighted as if in direct light even when it's in the shadow side of the ship. possible alpha-channel issue?

thank you for letting me know that, but sadly my knowledge of alpha-channel is none, i only know how to build ships and GMunoz
hardpoints my models but he has alot on with his TOS ships, so might need some extra help with the new refit.

cinqnic · « **Reply #330 on:** October 18, 2010, 06:01:34 AM »

here some up dates on the adder class

thank you GMunoz

cinqnic · « **Reply #331 on:** October 18, 2010, 06:03:29 AM »

1 more picture

cinqnic · « **Reply #332 on:** November 05, 2010, 12:07:08 PM »

here a design being sitting on my pc for abit i cant seem to find the designer who ask me to build the ship, so if its yours design let me know, for i can get the ship hardpointed and sent to bc filefront

MarkyD · « **Reply #333 on:** November 05, 2010, 01:10:43 PM »

Adder looks great ingame

good job.

JamesTiberiusKirk · « **Reply #334 on:** November 06, 2010, 09:44:22 PM »

Quote from: cinqnic on November 05, 2010, 12:07:08 PM

here a design being sitting on my pc for abit i cant seem to find the designer who ask me to build the ship, so if its yours design let me know, for i can get the ship hardpointed and sent to bc filefront

wasnt that hobbs?

deadthunder2_0 · « **Reply #335 on:** November 06, 2010, 10:25:12 PM »

no it was arse's design, but Gmunzo hpd it, and i tested it some time ago, i remember the ship had a ton of torpedoes that tracked too well, but were overpowered, and too slow

cinqnic · « **Reply #336 on:** November 18, 2010, 09:16:06 AM »

hi just to let people know that the Adder class has been sent to bc file front so keep a eye out for it

King Class Scout · « **Reply #337 on:** November 18, 2010, 10:07:40 AM »

YES...I've been waiting for that one.

cinqnic · « **Reply #338 on:** November 21, 2010, 04:51:10 PM »

Right heres what i am working on right now but ive got a some other project see picture

1, new design 1st two picture
2, venture re refit 3rd pic making it more sov in feel
3, nx-01 era ship 4 pic

cinqnic · « **Reply #339 on:** December 06, 2010, 03:28:13 PM »

hi I was ask to do the USS Preble what can be found at
http://www.inpayne.com/models/kitbash/trekpage_preble.html
heres what ive done so far, I will be putting alot of work into this one plus I now got paint shop pro 9 so I can do better texture once I learn how to do them, any way any feed back welcome

News:

Author Topic: Cinqnic WIP's 3d printer ship (Read 75928 times)