Author Topic: Baz1701 WIP's - Semi retired. (Read 488466 times)

Aeries · « **Reply #220 on:** July 10, 2009, 02:12:35 PM »

Here ya go... :]

baz1701 · « **Reply #221 on:** July 10, 2009, 02:39:38 PM »

May not be so sunken but they are there

Dalek · « **Reply #222 on:** July 10, 2009, 02:41:11 PM »

I think your nacelles need to be more obvious there are 2 sections. The connector to the pylon and the main warp nacelles. That deep bit looks like its part of the main nacelle which it isn't.

Aeries · « **Reply #223 on:** July 10, 2009, 02:49:07 PM »

Quote from: baz1701 on July 10, 2009, 02:39:38 PM

May not be so sunken but they are there

OHHH that's what it was! Okay, sorry, my mistake then. xD

086gf · « **Reply #224 on:** July 10, 2009, 02:57:46 PM »

The very top dome of the bridge structure is way to high it needs to be much more subtle.

Quote

hmm...A JJ excelsior? I'm looking forward to this

And all you got to do to see it is go back to the tenth page. Weily was working on one too IIRC.

baz1701 · « **Reply #225 on:** July 10, 2009, 03:26:41 PM »

The "joining line" will textured on.

The bridge dome is too big, my lunch break had ended before I had it right.

Johnnymuffintop · « **Reply #226 on:** July 10, 2009, 04:43:13 PM »

And chance of a JJPrise and Connie refit kitbash?

baz1701 · « **Reply #227 on:** July 10, 2009, 04:44:59 PM »

I think that project needs more that a kit bash

Billz · « **Reply #228 on:** July 10, 2009, 05:04:18 PM »

Will you making the nacelle fins like they are in that screenshot from the movie?

baz1701 · « **Reply #229 on:** July 10, 2009, 05:06:34 PM »

I have been playing with the mark 3 to do the effect using the warp warm up scrip and change the textures to simulate the fins opening and the bussard and end caps glowing.

Still a work in progress but it is getting there

Shadowknight1 · « **Reply #230 on:** July 10, 2009, 07:28:02 PM »

The ventral aft area of the engineering hull is a bit too blocky and the nacelle end needs to be sunken in with a half-spherical dome in the center, sort of like the TOS 1701's engines. And since you already know about the bridge dome, I can't think of anything else wrong. ^_^

Billz · « **Reply #231 on:** July 10, 2009, 07:43:21 PM »

Those nacelles are too long.

baz1701 · « **Reply #232 on:** July 11, 2009, 09:36:20 AM »

Quote from: Shadowknight1 on July 10, 2009, 07:28:02 PM

The ventral aft area of the engineering hull is a bit too blocky and the nacelle end needs to be sunken in with a half-spherical dome in the center, sort of like the TOS 1701's engines. And since you already know about the bridge dome,

Not 100% happy with the engineering hull, it is next to be reviewes. and I have already fixed the bridge dome. I will also be looking at the nacelle end caps as well.

Quote from: Billz on July 10, 2009, 07:43:21 PM

Those nacelles are too long.

They are the right length for my refernece images. I think the lack of bulk in the engineering hull is over scaling the nacelles.

baz1701 · « **Reply #233 on:** July 11, 2009, 11:42:43 AM »

oK, totally rebuilt the enginering hull, I'm much more happy with it not.

The trouble it the dorsal and pylons need reworking to align the to the hull.

DJ Curtis · « **Reply #234 on:** July 11, 2009, 11:51:44 AM »

much improved, though you've got an error in the undercut. looks like some double edges from offset verts.

baz1701 · « **Reply #235 on:** July 11, 2009, 11:54:36 AM »

Quote from: DJ Curtis on July 11, 2009, 11:51:44 AM

much improved, though you've got an error in the undercut. looks like some double edges from offset verts.

could you translate that in to a laymans terms for, still learning the terms. perhaps circle a pic withe the error?

Shadowknight1 · « **Reply #236 on:** July 11, 2009, 03:53:21 PM »

Ehhh...you have to remember baz, the ventral section of the secondary hull has no flat surface besides the inner section of the cut-out. Also, the warp engine pylons are sortof attached to the secondary hull like the Ent-D's pylons, with the trailing edge of the pylon coming into the lower shuttlebay rim. Remember your references. ;)

baz1701 · « **Reply #237 on:** July 14, 2009, 08:16:27 AM »

Have worked on the bottom of the engineering hull and the nacelle end caps

Kirk · « **Reply #238 on:** July 14, 2009, 09:09:59 AM »

You keep getting better.

+krama

CyAn1d3 · « **Reply #239 on:** July 14, 2009, 02:10:29 PM »

yesindeedy lookin gooood

News:

Author Topic: Baz1701 WIP's - Semi retired. (Read 488466 times)