Author Topic: Baz1701 WIP's - Semi retired. (Read 487694 times)

WileyCoyote · « **Reply #460 on:** August 06, 2009, 09:58:39 AM »

I lightened up the picture a bit. The lighting was really bad in that section. Hope this helps.

baz1701 · « **Reply #461 on:** August 06, 2009, 10:08:42 AM »

I stand corrected and will add them.

Thanks for clearning that up, and of course for you help the other night get the Specs to work.

Cookie incoming.

Billz · « **Reply #462 on:** August 06, 2009, 12:55:14 PM »

Oh.

*slaps forehead*

To be fair, the picture I posted was straight from the trailer, although it was from YouTube with the HD button pressed.

I thought the TOS hull markings were added to Wileys because of 'artistic liscensing'. Totally wrong. Sorry to drag this thread off-topic.

baz1701 · « **Reply #463 on:** August 06, 2009, 03:34:45 PM »

here is some more of the tng connie

Darkthunder · « **Reply #464 on:** August 06, 2009, 03:39:08 PM »

Bussard sides need to be a bit more rounded (if your attempting a "Galaxy"-esque nacelle design) Looks pretty well rounded in general, but it is plainly obvious that it gets very "squared" along the sides of the bussards.

The different nacelles look okay, but definitely needs some "refinement" in some areas. Other than these suggestions, it looks to be coming along quite nicely. Will be interesting to see what type of texturing style you use for it.

King Class Scout · « **Reply #465 on:** August 06, 2009, 03:54:59 PM »

personally, I'd orient them vertically, and rewrap the strip onto the broad side, or simply remove the manifold from the mounting point foreward. but then, i have a fondness for the refit type.

oh, if Markd shows up, tell him some of us HAVE the Gagarin, and would like permission to honour some more Soviet Starters (i have three names allready in mind)

Joshmaul · « **Reply #466 on:** August 06, 2009, 04:14:18 PM »

Quote from: King Class Scout on August 06, 2009, 03:54:59 PM

oh, if Markd shows up, tell him some of us HAVE the Gagarin, and would like permission to honour some more Soviet Starters (i have three names allready in mind)

I would figure Leonov would be one of them.

baz1701 · « **Reply #467 on:** August 06, 2009, 04:17:00 PM »

I've made the bussards more square then the galaxy's to better suit the angler lines of the connie.

I have already tried rotating the nacelles but it look awful so they stay as they are.

King Class Scout · « **Reply #468 on:** August 06, 2009, 08:14:59 PM »

Quote from: Joshmaul on August 06, 2009, 04:14:18 PM

I would figure Leonov would be one of them.

mister First EVA? i think he's allready on an Oberth.

actually, i was thinking Mrs first in space, Sputnik itself, a certian muttley, a couple of their Launching spots, etc.

Centurus · « **Reply #469 on:** August 07, 2009, 01:00:45 AM »

I'd get rid of those impulse engines. They don't look right on the ship. Probably best to construct an impulse engine reminiscent of the TMP impulse engines, but with a slightly updated look.

The warp engines don't look right that way. Makes the ship feel shorter. Perhaps making them cylindrical with a TNG feel, something based off the Ambassador design rather than the Galaxy design.

King Class Scout · « **Reply #470 on:** August 07, 2009, 10:02:34 AM »

F9: the Gagarin variant uses exactly what your describing allready. let Baz do his own take.

how much effort would/does it take to stretch the nacelles a few meters?
he's right about the impulse deck, though. I'd think the backwash would mess with the nacelles or their pylons. course, I'm having a similar problem with the basic design of my King Class.

Centurus · « **Reply #471 on:** August 07, 2009, 11:51:01 AM »

Quote from: King Class Scout on August 07, 2009, 10:02:34 AM

F9: the Gagarin variant uses exactly what your describing allready. let Baz do his own take.

how much effort would/does it take to stretch the nacelles a few meters?
he's right about the impulse deck, though. I'd think the backwash would mess with the nacelles or their pylons. course, I'm having a similar problem with the basic design of my King Class.

I thought we were allowed to make comments and offer some suggestions? Or am I not allowed to do that while you are?

King Class Scout · « **Reply #472 on:** August 07, 2009, 01:50:21 PM »

F9: it's been done allready, is what I was saying., and I bet Baz doen't want a repeat

we'll let him decide.

Aeries · « **Reply #473 on:** August 07, 2009, 02:41:08 PM »

Quote from: King Class Scout on August 07, 2009, 01:50:21 PM

We'll let him decide.

Will we now?

Interesting ship, Baz.

WileyCoyote · « **Reply #474 on:** August 07, 2009, 02:46:57 PM »

You can keep the impulse engines as they are right now. But to prevent them looking like the Enterprise-B's, you can simply make them just come out of the saucer rim, or you can make a "cut-out" section for them like the Ent-D.

Aeries · « **Reply #475 on:** August 08, 2009, 01:50:23 PM »

Quote from: WileyCoyote on August 07, 2009, 02:46:57 PM

or you can make a "cut-out" section for them like the Ent-D.

Actually that might look kinda cool. :]

MarkyD · « **Reply #476 on:** August 08, 2009, 05:36:55 PM »

Quote from: King Class Scout on August 06, 2009, 03:54:59 PM

oh, if Markd shows up, tell him some of us HAVE the Gagarin, and would like permission to honour some more Soviet Starters (i have three names allready in mind)

Feel free mate,

Baz I like you take so far.. Its the complete opposite to my idea which kinda rocks..

Look forward to seeing what you come up with, I will be posting my sketches soon

baz1701 · « **Reply #477 on:** August 10, 2009, 08:01:41 AM »

Here is a little "Old School" Project

Shino Tenshi · « **Reply #478 on:** August 10, 2009, 08:49:51 AM »

dunno... something looks off with it =/

King Class Scout · « **Reply #479 on:** August 10, 2009, 10:18:11 AM »

hm. nobody seems to have done a connie with the "flat butt" nacelle ends

News:

Author Topic: Baz1701 WIP's - Semi retired. (Read 487694 times)